91 Detection Management Software

Environmental Monitor Communication

Detection Management Software

CHAPTER

6

Environmental Monitor Communication

Once communicating with the Environmental Monitor (EVM) and Detection Management Software

(DMS), you have the option to download data, configure instrument parameters, and configure quick setup features, such as the time and date settings. The following explains the EVM communication download and/or setup steps.

1.

Plug the USB cable into the powered on EVM and then connect it to the computer port.

Figure 6: Communicating with the Environmental Monitor and Detection Management Software

EVM Series User Manual

92 Environmental Monitor Communication

Estimated Run Time

2.

From the start page of DMS, select either button (see ❶ ) or button (see

❷ and the Instrument Communications page will appear with setup and download panels.

3.

Select Air Quality and then select EVM under Instrument (see ❸ and ❹ ). You are now ready to setup or download your instrument (see ❺ ).

❸

❶ ❷

❹

Figure 6-1: DMS Start page and Setup/Download options

EVM Series User Manual