Estimated Logged Run Times. TSI Quest Quest Environmental Monitor EVM Series, EVM-7
Add to My manuals178 Pages
advertisement
![Estimated Logged Run Times. TSI Quest Quest Environmental Monitor EVM Series, EVM-7 | Manualzz Estimated Logged Run Times. TSI Quest Quest Environmental Monitor EVM Series, EVM-7 | Manualzz](http://s1.manualzz.com/store/data/066743489_1-f0026634e3186df1dd6c2b6224560a5b-360x466.png)
124 Specifications
Estimated Logged Run Times
Estimated Logged Run Times
Standard EVM-7 (Memory and logged time)
(Logging the following Sensors: Dust, Temp, Humidity, CO
2
, Toxic, PID, Dew Pt)
Logging Rate
1 seconds
5 seconds
15 seconds
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
31.0
154.9
464.8
31.0
154.9
464.8
929.6
1859.2
9296.1
18592.1
27888.2
55776.4
111552.8
Run Time (Hours)
Number of Measurements Logged
2
15.5
77.5
232.4
15.5
77.5
232.4
464.8
929.6
4648.0
9296.1
13944.1
27888.2
55776.4
3
10.3
51.6
154.9
10.3
51.6
154.9
309.9
619.7
3098.7
6197.4
9296.1
18592.1
37184.3
4
7.7
38.7
116.2
7.7
38.7
116.2
232.4
464.8
2324.0
4648.0
6972.1
13944.1
27888.2
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
1.3
6.5
19.4
38.7
77.5
387.3
774.7
1162.0
2324.0
4648.0
Run Time (Days)
Number of Measurements Logged
2
0.6
3.2
9.7
19.4
38.7
193.7
387.3
581.0
1162.0
2324.0
3
0.4
2.2
6.5
12.9
25.8
129.1
258.2
387.3
774.7
1549.3
4
0.3
1.6
4.8
9.7
19.4
96.8
193.7
290.5
581.0
1162.0
5
6.2
31.0
93.0
6.2
31.0
93.0
185.9
371.8
1859.2
3718.4
5577.6
11155.3
22310.6
5
0.3
1.3
3.9
7.7
15.5
77.5
154.9
232.4
464.8
929.6
EVM Series User Manual
125 Specifications
Estimated Logged Run Times
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1.1
2.1
3.2
6.4
12.7
1
0.0
0.0
0.1
0.1
0.2
0.5
1.1
1.6
3.2
6.4
2
0.0
0.0
0.0
0.1
0.1
Run Time (Years)
Number of Measurements Logged
0.4
0.7
1.1
2.1
4.2
3
0.0
0.0
0.0
0.0
0.1
0.3
0.5
0.8
1.6
3.2
4
0.0
0.0
0.0
0.0
0.1
Standard EVM-4 (Memory and logged time)
(Logging the following Sensors: Temp, Humidity, CO
2
, Toxic, Dew Pt)
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
49.6
247.9
743.7
1487.4
2974.7
14873.7
29747.4
44621.1
89242.2
178484.5
Run Time (Hours)
2
Number of Measurements Logged
3
24.8 16.5
4
12.4
123.9
371.8
743.7
82.6
247.9
495.8
62.0
185.9
371.8
1487.4
7436.9
14873.7
22310.6
44621.1
89242.2
991.6
4957.9
9915.8
14873.7
29747.4
59494.8
743.7
3718.4
7436.9
11155.3
22310.6
44621.1
5
9.9
49.6
148.7
297.5
594.9
2974.7
5949.5
8924.2
17848.4
35696.9
0.2
0.4
0.6
1.3
2.5
5
0.0
0.0
0.0
0.0
0.0
EVM Series User Manual
126 Specifications
Estimated Logged Run Times
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
2.1
10.3
31.0
62.0
123.9
619.7
1239.5
1859.2
3718.4
7436.9
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
0.3
1.7
3.4
5.1
10.2
20.4
1
0.0
0.0
0.1
0.2
62.0
309.9
619.7
929.6
1859.2
3718.4
Run Time (Days)
2
Number of Measurements Logged
3
1.0 0.7
4
0.5
5.2
15.5
31.0
3.4
10.3
20.7
2.6
7.7
15.5
41.3
206.6
413.2
619.7
1239.5
2479.0
31.0
154.9
309.9
464.8
929.6
1859.2
0.2
0.8
1.7
2.5
5.1
10.2
Run Time (Years)
2
Number of Measurements Logged
3
0.0 0.0
4
0.0
0.0
0.0
0.1
0.0
0.0
0.1
0.0
0.0
0.0
0.1
0.6
1.1
1.7
3.4
6.8
0.1
0.4
0.8
1.3
2.5
5.1
5
0.4
2.1
6.2
12.4
24.8
123.9
247.9
371.8
743.7
1487.4
0.1
0.3
0.7
1.0
2.0
4.1
5
0.0
0.0
0.0
0.0
EVM Series User Manual
127 Specifications
Estimated Logged Run Times
Standard EVM-3 (Memory and logged time)
(Logging the following Sensors: Dust, Temp, Humidity, Dew Pt)
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
49.6
247.9
743.7
1487.4
2974.7
14873.7
29747.4
44621.1
89242.2
178484.5
Run Time (Hours)
2
Number of Measurements Logged
3
24.8 16.5
4
12.4
123.9
371.8
743.7
82.6
247.9
495.8
62.0
185.9
371.8
1487.4
7436.9
14873.7
22310.6
44621.1
89242.2
991.6
4957.9
9915.8
14873.7
29747.4
59494.8
743.7
3718.4
7436.9
11155.3
22310.6
44621.1
Logging Rate
1 seconds
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hour
1
2.1
10.3
31.0
62.0
123.9
619.7
1239.5
1859.2
3718.4
7436.9
31.0
62.0
309.9
619.7
929.6
1859.2
3718.4
2
1.0
Run Time (Days)
Number of Measurements Logged
5.2
15.5
3
0.7
3.4
10.3
4
0.5
2.6
7.7
20.7
41.3
206.6
413.2
619.7
1239.5
2479.0
15.5
31.0
154.9
309.9
464.8
929.6
1859.2
5
9.9
49.6
148.7
297.5
594.9
2974.7
5949.5
8924.2
17848.4
35696.9
5
0.4
2.1
6.2
12.4
24.8
123.9
247.9
371.8
743.7
1487.4
EVM Series User Manual
advertisement
Related manuals
advertisement
Table of contents
- 9 List of Figures
- 10 List of Tables
- 12 Particulate Sampling (Aerosols/Dust Vapors)
- 12 Particulate Path
- 13 Particulate Sizes
- 14 Particulates and Cut-Point
- 14 Collecting/Sensing the Particulates
- 14 Gravimetric Sampling
- 14 Pump
- 14 Gas Sensors Sampling
- 15 Gas Sensors and Path
- 16 Volatile Organic Compounds (VOCs) Sampling
- 16 Temperature, Relative Humidity, Dew Point
- 16 What the Standards Say
- 17 Resources
- 18 EVM Series
- 18 Applications
- 19 Models Explained
- 21 Checking the Equipment
- 22 Display and Keypad
- 22 Diagram
- 22 Keypad description
- 23 Turning on
- 23 Start Screen Explanation
- 24 Navigating
- 24 Indicators/Icons on the display
- 25 Turning Off
- 25 Instrument Information
- 25 Unit Information Screen
- 27 TSI Detection Management Software DMS
- 27 Communicating
- 27 Powering and Outputs on the EVM
- 27 Battery
- 28 Charging
- 28 Outputs
- 29 Setting up Parameters via the Keypad
- 29 Time and Date Setting
- 30 Checking Battery Power
- 32 Display: Language, Contrast, and Key Click
- 33 Setting Logging and Viewing Run Time
- 35 PID Sensor Setup
- 37 Changing Units (Temperature, Particulates, PID, and Air Velocity)
- 37 Setting up Particulate Settings
- 38 Setting Profiles (Particulate Correction Factors)
- 38 How Particulate Factors are Adjusted and Calculated
- 38 Dust Correction Factors (Profiles)
- 40 Particulate Pump: Enable or Disable
- 40 Resetting the Gravimetric Filter
- 41 Auxiliary Input/Output
- 41 Digital Output
- 43 Air Velocity
- 43 Analog-out
- 44 Restoring Default Factory Settings
- 46 Backlight Setting
- 46 Resetting the EVM
- 46 Lock/Secure Run and/or Setup
- 48 Unlock run and/or setup
- 48 Auto-run
- 48 Auto-run and timed-run mode
- 49 Auto-Run with Date Mode
- 50 Auto-Run with Day of Week (DOW) Mode
- 53 Placement and Calibration of Sensors
- 53 Calibrating sensors include:
- 53 Inserting and Removing Sensors
- 54 Calibrating Particulates
- 55 Impactor and use
- 56 Adjusting the Impactor/Turret Setting
- 57 Particulates Calibration (Zero Cal)
- 61 Particulate Advanced Calibration (Gravimetric)
- 62 Performing a Gravimetric Calibration
- 63 Pump Flow Rate Calibration
- 64 Toxic Gas Sensors
- 65 Cross Sensitivity
- 65 How Sensors Operate
- 65 Quality Calibrations
- 65 About Sensors and Cal Storage
- 65 Calibration History and Sensor Serial Numbers
- 66 Applying a Gas Sensor
- 66 Calibrating Toxic Gas Sensors
- 67 Toxic Gas Zero Calibration
- 67 Ozone Calibration for Zero and Span
- 69 Toxic Gas Span Calibration
- 70 Calibrating CO2 AND O2
- 70 O2 Accuracy
- 73 Calibrating Photo-Ionization Detector (PID) Sensor
- 73 PID parts per million (ppm) zero calibration
- 73 PID parts per billion (ppb) zero calibration
- 74 PID Span Calibration
- 76 Calibrating Relative Humidity and Temperature
- 77 Calibration History
- 78 Verify Calibration and Drifting Analysis
- 62 Gravimetric Calibration Overview
- 81 Overview of Running a Session
- 81 Quick Help
- 81 Measuring
- 82 Understanding What Data is Stored
- 82 Summary Data
- 82 Logged Data/Time History
- 83 Running and Stopping
- 84 Measurement Screens and Navigation
- 84 Unit defined
- 85 About the Measurement Soft Keys
- 86 Particulate Measurement Screen
- 86 Impactors and Particulate Measuring
- 86 Extending Run-Time for PM Measurements
- 87 Changing Particulate Measurements
- 88 Relative Humidity and Temperature Measurements
- 88 Relative Humidity and Temperature Screen
- 89 Gas Measurements
- 89 Gas Screen
- 90 Composite Measurement
- 90 Composite Screens
- 91 Air Velocity Meaursurement Screen
- 92 Summary Data
- 92 Viewing Details in the Measurement Screen
- 93 Trend Data
- 93 Viewing trend data in the measurement screen
- 94 Past Session
- 94 Summary Data Screen
- 96 File System Menu
- 96 Deleting Sessions Individually
- 97 Delete All Sessions
- 98 Memory Remaining and File Properties
- 99 Estimated Run Time
- 101 Environmental Monitor Communication
- 103 Downloading Data with the EVM
- 103 EVM: Viewing Data
- 103 Selecting a session/study
- 104 EVM Panel Layout View (PLV) Page
- 106 EVM Reports and Printing
- 107 Customizing Reports
- 108 EVM Setup
- 108 Saving and Sending Configurations
- 109 General EVM Setup
- 109 EVM General Parameters Table
- 110 EVM and Logging Settings
- 111 EVM Logging Parameters Table
- 112 Timed-Run and Auto-Run Setting
- 112 Date and Auto-Run Setting
- 113 Day of Week and Auto-Run Setting
- 114 EVM and Security Settings
- 114 EVM and Triggering Settings
- 116 EVM and Particulate Settings
- 116 EVM and Particulates Setup
- 117 EVM Firmware Update
- 119 Overview
- 119 PID Sensor
- 120 Removing and Installing PID Sensor
- 121 Maintenance and Cleaning Overview of PID
- 121 Cleaning PID Sensor
- 123 Optical Engine: Maintenance and Cleaning
- 126 Impactor Care
- 127 Impactors and When To Clean
- 127 Gravimetric Cassette and Filter Paper
- 129 Particulate Sensor
- 129 Volatile Organic Compounds (VOCs) Gas Detector (PID Sensor)
- 130 Carbon Dioxide Sensor
- 130 Relative Humidity Sensor
- 130 Temperature Sensor
- 131 Toxic Gas Sensors
- 131 Air Velocity Accessory (Optional – Air Probe 10)
- 131 Displayed Data
- 132 Electrical Characteristics
- 132 Environmental effects
- 132 Physical characteristics
- 132 Measurements units
- 133 Operating Modes
- 133 Time Constants
- 133 Special Functions
- 134 Estimated Logged Run Times
- 134 Standard EVM-7 (Memory and logged time)
- 135 Standard EVM-4 (Memory and logged time)
- 137 Standard EVM-3 (Memory and logged time)
- 138 Accessories: Replacement and Optional Parts
- 141 Customer Service
- 141 Technical Support Contacts
- 141 Service Contact Information
- 142 Returning for Service
- 142 Calibration
- 143 Warranty
- 151 PID sensor and correction factors tables
- 161 Frequently Asked Questions (FAQs)
- 161 Particulate Measurements
- 163 Gravimetric Sample (optional for particulate calibration)
- 164 Toxic Sensor Measurements
- 165 Pump/Airflow Measurements
- 166 Digital Output (using stereo plug & diagram)
- 167 PID Questions (for Volatile organic compound measurements)
- 168 Power
- 168 Alarm Outputs
- 169 General: Mechanical
- 169 CO2 Sensor and how to reorder
- 170 CO2 Sensor and how to reorder (continued)
- 170 Calibrating Sensors
- 173 System Errors Displayed on the EVM Series