Summary Data. TSI Quest Quest Environmental Monitor EVM Series, EVM-7

82 Summary Data

Viewing Details in the Measurement Screen

Summary Data

In each of the measurement screens, a Detail soft key will appear. Once selected, you can view a quick summary of all measurement calculations in one screen. This is explained below.

Viewing Details in the Measurement Screen

 Viewing the composite measurements in individual summary screens

1.

To view details of a sensor, select a measurement screen and then select/highlight a specific sensor (if more than one is displayed).

 For example, to select PM from the Composite screen, press ▲ / ▼ Arrows or the Select soft key.

2.

Press the Detail soft key and a summary screen of the selected measurement screen (i.e., PM 2.5

– particulates screen) will appear.

PM (Composite) details screen

Exit soft key

Figure 5-12: Details of the composite measurement screen

3.

Press On/Off/Esc to return to the previous screen.

 Repeat these steps to view other sensor measurements.

EVM Series User Manual