Programming transitions. Schneider Electric PL7 Junior/Pro - Premium PLC Application-specific functions - Step-by-step axis control
Below you will find brief information for TSX Premium TSX CFY. This module offers application inputs and outputs for axis control, enabling event processing, boost command, brake control, feed hold, and end-of-run limit management. The module controls step-by-step motor rotation speed and accelerations, delivering a frequency command to a translator for basic movement control.
Advertisement
Advertisement
Advertisement
Key features
Event Processing: Activates tasks based on detected events.
Boost Command: Boosts motor during acceleration/deceleration.
Brake Control: Synchronizes brake with motor start/stop.
Feed Hold: Momentarily stops movement.
End of Run Limits: Stops movement at axis boundaries.
Step Failure Management: Allows application management of step failure information from the translator.
Frequently asked questions
The boost command increases the current in the motor windings during acceleration and deceleration phases to improve motor performance.
End-of-run limits stop the movement of the axis when it reaches the physical boundaries, preventing damage to the system.
The brake output is synchronized with the motor's start and stop sequences, either automatically or manually, improving control of vertical loads.