Configuration of the electronic cam module
Declaring the module in the PLC rack
Procedure This operation is used to declare the software equivalent of the electronic cam module in a TSX 57 PLC rack.
Step
1
Action l l
In the application browser, select and click on the Station and
Configuration folders one after the other.
Double-click on the Hardware configuration icon.
Application Browser
2
3
Structure View
STATION
Configuration
Hardware configuration
Software configuration
Program
MAST task
Events
DFB types
Variables
Animation tables
File
Operating screens
If the application browser is not displayed: l l click on the application browser icon or select the Tools
→
Application Browser command
Double-click on the slot in which the module is to be configured
Select the Counting family from the Family list, then the module reference from the Module list.
Adding a module
Family:
Analog 1.5
Communication 1.5
Counting
Remote BusX
Movement
Weighing
Modeling
All or Nothing
1.5
1.0
1.5
1.7
1.0
1.5
Module:
TSX CCY 1128 MOD.ELEC.CAM 128 CAMS
TSX CTY 2A COUNT.MOD. 2 CHANNELS 40KHZ
TSX CTY 2C COUNT.MEASURE.MOD 2
CHANNELS
TSX CTY 4A COUNT.MOD. 4 CHANNELS 40KHZ
OK
Cancel
64
TLX DS 57 PL7 xx
TLX DS 57 PL7 xx
Step
4
Configuration of the electronic cam module
Action
Click on OK,
Result:
The module is declared in its slot. The slot is grayed out and contains the module reference.
Configuration
TSX 57452 V3.3 … XMWI
XTI..
0
0
0
2
6
P
S
Y
0
4
5
5
7
2
T
S
X
1
2 3 4 5
2
8
1
1
C
C
Y
6
65
