TRF_RECIPE: Recipe transfer functions. Schneider Electric Software PLC Application-Specific Functions, Electronic cam module, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLCs Electronic cam module TSXCCY1128 - Application implementation

Programming

TRF_RECIPE: Recipe transfer functions

General l l

An application program can use several recipes. These are contained in several memory zones. The TRF_RECIPE instruction is used to: transfer the contents of the current recipe to a memory zone.

transfer a recipe from a memory zone to the %MW zone containing the current recipe and transfer it to the module. In this case the cam processor switches to

STOP mode as for the WRITE_PARAM instruction.

Note: It is possible to save (Restore) one or more recipes to the memory zone in a paged PCMCIA using the WRITE_PCMCIA (READ_PCMCIA) instructions.

158

TLX DS 57 PL7 xx