Reading format configuration. Schneider Electric Software PLC Application-Specific Functions, Electronic cam module, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLCs Electronic cam module TSXCCY1128 - Application implementation

Configuration of the electronic cam module

Reading format configuration

Role of the parameter

Parameter selection

This parameter defines the format for the axis position reading, calculated by the module.

The format is chosen according to the type of movement.

The following table can be used to select the format type (1, 2 or 3) depending on the type of application.

Type 1 Type 2 Type 3

Type of movement rotary and alternating

Position reading angular cyclic continuous

Format

Synchro

8..15 bits (cycle) for incremental

8..14 bits for absolute machine

Type of encoder incremental or absolute angular

+ number of turns counting the number of pulses

8..15 bits (cycle) for incremental

8..14 bits for absolute

1..15 bits (turn)

15 bits (cycle) ie. 32768 pulses machine incremental or absolute parts detection incremental

The choice is made via a pull-down menu. The other fields are for information only.

TLX DS 57 PL7 xx

73