DETAIL_OBJECT: Operator dialog interface. Schneider Electric Software PLC Application-Specific Functions, Electronic cam module, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLCs Electronic cam module TSXCCY1128 - Application implementation

Programming

DETAIL_OBJECT: Operator dialog interface

General

Function parameters

The DETAIL_OBJECT function facilitates the management and creation of a recipe using operator dialog. It gives the application program use of all the descriptive information for a track or a cam in a %MW memory zone selected by the programmer.

l l l l l l l l

DETAIL_OBJECT %CHxy.0 (ACTION, TYPE_OBJECT, NUM_GROUP,

NUM_OBJECT, ADR)

ACTION = 1: Ext is used to write the cam or track descriptor to a memory zone

Action = 0: Inc is used to write the cam or track descriptor with data to the memory zone.

type of object = 0: cam.

type of object = 1: track.

NUM_GROUP = number of the group to which the cam or track belongs.

NUM_OBJET = number of the cam or track in the group.

ADR = address of the first object in the memory zone.

164

TLX DS 57 PL7 xx