Configuring the electronic cam parameters. Schneider Electric Software PLC Application-Specific Functions, Electronic cam module, Junior/Pro, 4.5, PL7 Junior/Pro - Premium PLCs Electronic cam module TSXCCY1128 - Application implementation

Configuration of the electronic cam module

Configuring the electronic cam parameters

Role

Procedure

This operation is used to: l l declare an event task associated to the module mask all or some of the application faults

The following table describes the operations to be performed:

Step

1

Action

In the browser, double-click on Electronic cam.

Result:

Configuration parameters:

Event

EVI 1

Errors

Masking

2

3

If an event task in the PLC processor must be assigned to the module: l l click in the EVT check box, select the number of the associated Event task, from 0 to 63 (0 being the priority task).

Masking a fault prevents the fault indication being taken into account in the general channel fault information. The associated check remains active, however, and affects the operating modes of the module.

To mask the faults: click on the Mask button.

Result:

Errors

Encoder supply fault

Auxiliary inputs supply fault

Track outputs supply fault

Masking

Confirm Cancel

Check the box(es) of the faults which are to be masked and confirm.

TLX DS 57 PL7 xx

67