X64-CL iPro Series User's Manual

Introduction

The X64-CL iPro Series User's Manual covers the following topics:

• Overview of the X64-CL iPro Series

Description of the X64-CL iPro and X64-CL iPro\Lite products and a brief summary of their capabilities.

• Installing the X64-CL iPro

Installation procedures for the X64-CL iPro board and driver under Windows XP, Windows

Vista or Windows 7, as well as information on camera connectivity.

• CamExpert Quick Start for the X64-CL iPro

User's guide to interfacing cameras with CamExpert and using the CamExpert demo tools.

• The Sapera Demo Application

Using the Sapera Acquisition demo programs to test the X64-CL iPro installation.

• X64-CL iPro Reference

Descriptions of X64-CL iPro and X64-CL iPro\Lite hardware, block diagram, capabilities, and acquisition modes supported.

• X64-CL iPro Sapera Servers & Resources

Specifications specific to the Sapera Imaging Library.

• Technical Specifications

Connector locations and pin-out descriptions.

• Camera Link Interface

Overview of the Camera Link specification.

• X-I/O Module Option

Describes the X-I/O module, its configuration, cabling, and usage.

• DALSA Contact Information

Phone numbers, web site, and important email addresses.

X64-CL iPro Series User's Manual

Introduction • 1