X64-CL iPro Series User's Manual

Flat-Field Demo Overview

Program

Program file

Start•Programs•DALSA•Sapera LT•Demos•Flat Field Demo

\dalsa\Sapera\Demos\Classes\vc\FlatFieldDemo\Release\FlatfieldDemo.exe

Workspace \dalsa\Sapera\Demos\Classes\vc\SapDemos.dsw

Description

Remarks

This program demonstrates Flat Field or Flat Line processing, either performed by supporting DALSA hardware or performed on the host system via the Sapera library.

The program allows you to acquire a flat field or flat line reference image, and then do real time correction either in continuous or single acquisition mode. The program code may be extracted for use within your own application.

This demo is built using Visual C++ 6.0 using the MFC library. It is based on Sapera

C++ classes. See the Sapera User’s and Reference manuals for more information.

Using the Flat Field Demo

Refer to the Sapera LT User's Manual (OC-SAPM-USER), in section "Using the Flat Field Demo", for more information.

54 • Sapera Demo Applications

X64-CL iPro Series User's Manual