X64-CL iPro Series User's Manual

X64-CL iPro\Lite Board Specifications

Digital Video Input & Controls

Input Type

Common Pixel Formats

Base Configuration

Pixel Formats/Tap

Scanning

Input LUTs

Camera Link Specifications Rev 1.10 compliant 1 Base

3 x 8-bit, 2 x 10-bit, 2 x 12-bit, 1 x 14-bit, 1 x 16-bit, 1 x 24-bit RGB

Resolution

note: these are X64-CL iPro maximums, not Camera Link

specifications

Pixel Clock Range

Serial Port

Progressive, Multi-Tap, Multi-Channel, Four quadrant, Tap reversal

Yes.

See section “

X64-CL iPro LUT availability ” (page 65)

for details.

Horizontal Minimum:

8 Pixels per tap

Horizontal Maximum:

8-bits/pixel x 256K Pixels/line

16-bits/pixel x 128K Pixels/line

32-bits/pixel x 64K Pixels/line

64-bits/pixel x 32K Pixels/line

Vertical Minimum: line

Vertical Maximum: up to 16,000,000 lines (for area scan sensors) up to 85 MHz

Supports communication speeds 9600 to 115 kbps event includes end/start-of-field/frame/transfer

A TTL/LVDS trigger input programmable as active high or low (edge or level trigger). Trigger must be a minimum 100ns pulse.

TTL Strobe output

Quadrature (AB) shaft-encoder inputs for external web synchronization

(maximum frequency for any shaft encoder input is 1 MHz)

X64-CL iPro Series User's Manual

Technical Specifications • 85