advertisement
Introduction
The PAR 1 RGBW is a powerful LED lamp incorporating seven 10 W RGBW long-life CREE LEDs. It provides RGBW color mixing, 32 color presets, smooth electronic dimming, as well as strobe effects. The device is extremely rugged, lightweight and compact, and is ideal for mobile DJ’s or small fixed installations.
The fixture can be controlled using any DMX-compliant controller, and it has two
DMX control modes providing basic or more complex control capability. It can also function as a standalone device, running pre-programmed shows in show mode, with the option of sound-activated scene triggering.
The fixture is supplied with this user manual, a 1.5 m (5 ft.) power cable (local power plug not included) and a folding bracket that can also be used for rigging clamp attachment.
Before using the product
1. Read ‘Safety information’ on page 5 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, install as directed in this manual a local power plug (not supplied) on the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at www.martin.com for the most recent user documentation and technical information about the fixture. RUSH by Martin™ user manual revisions are identified by the revision letter at the bottom of the inside cover.
Note that when the fixture is powered on for the first time, it may smoke slightly as it warms up, but this will only last a few minutes and is no cause for concern.
10
RUSH PAR 1 RGBW User Manual
advertisement