![](http://s1.manualzz.com/store/data/014871686_1-1841fd096382c1a4c1b47c8ed8c9056f-128x128.png)
advertisement
![PAR 1 RGBW User Manual Professional Entertainment Technology | Manualzz PAR 1 RGBW User Manual Professional Entertainment Technology | Manualzz](http://s1.manualzz.com/store/data/014871686_1-1841fd096382c1a4c1b47c8ed8c9056f-360x466.png)
Maintenance
Warning! Read ‘Safety information’ on page 5 before servicing the fixture.
Refer any service operation not described in this user manual to a qualified service technician.
Disconnect mains power before cleaning or servicing the fixture.
Service fixtures in an area where there is no risk of injury from failing parts, tools or other materials.
The user may carry out the service operations described in this manual. All other service operations must be carried out by an authorized Martin™ service technician. Do not try to repair the fixture yourself, as you may create a safety risk or cause damage that is not covered by the product warranty.
Installation, on-site service and maintenance can be provided worldwide by the
Martin Professional™ Global Service organization and its approved agents, giving owners access to Martin’s expertise and product knowledge in a partnership that will ensure the highest level of performance throughout the product’s lifetime.
Please contact Martin™ for details.
Cleaning
Excessive dust, smoke fluid, and particle buildup degrades performance, causes overheating and will damage the fixture. Damage caused by inadequate cleaning or maintenance is not covered by the product warranty.
The cleaning of external optical lenses must be carried out periodically to optimize light output. Cleaning schedules for lighting fixtures vary greatly depending on the operating environment. It is therefore impossible to specify precise cleaning intervals for the fixture. Environmental factors that may result in a need for frequent cleaning include:
• Use of smoke or fog machines.
• High airflow rates (near air conditioning vents, for example).
• Presence of cigarette smoke.
• Airborne dust (from stage effects, building structures and fittings or the natural environment at outdoor events, for example).
If one or more of these factors is present, inspect fixtures within their first 100 hours of operation to see whether cleaning is necessary. Check again at frequent intervals. This procedure will allow you to assess cleaning requirements in your particular situation. If in doubt, consult your RUSH by Martin dealer about a suitable maintenance schedule.
26
RUSH PAR 1 RGBW User Manual
advertisement
Related manuals
advertisement
Table of contents
- 5 Safety information
- 10 Introduction
- 10 Before using the product
- 11 Physical installation
- 11 Fastening the fixture to a flat surface
- 11 Mounting the fixture on a truss
- 12 Securing with a safety cable
- 13 AC power
- 14 Linking fixtures to power in a chain
- 15 Fixture overview
- 17 Control data link
- 17 Tips for reliable data transmission
- 18 Connecting the DMX data link
- 18 Fixture setup
- 18 Using the control menus
- 18 DMX addressing
- 19 DMX channel modes
- 19 Show mode
- 20 Dimmer modes
- 21 Sound activation (music trig)
- 21 Microphone sensitivity
- 21 DMX state
- 22 LED display on/off
- 22 LED display inversion
- 22 White balance adjustment
- 23 Manual mode
- 23 Auto test
- 24 Temperature readout
- 24 Fixture operating hours readout
- 24 Firmware version
- 25 Effects
- 25 Color control
- 25 Electronic dimming
- 25 Shutter/Strobe
- 26 Maintenance
- 26 Cleaning
- 27 Replacing the primary fuse
- 27 Service and repairs
- 28 DMX protocols
- 28 4-channel mode
- 28 5-channel mode
- 28 7-channel mode
- 30 Control menus
- 33 Troubleshooting
- 35 Specifications