PAR 1 RGBW User Manual Professional Entertainment Technology

To select a DMX state option:

1. Select and press ENTER.

2. Use the DOWN and UP buttons to select

(fixture blacks out) or before it received a DMX signal).

(fixture enters show mode),

(fixture returns to the last state it was in

3. Press ENTER to set (or press MENU to exit without making a change).

LED display on/off

To set the control panel’s LED display to be on all the time, or to automatically sleep when not in use:

1. Select menu and press ENTER.

2. Use the DOWN and UP buttons to select ON (LED on) or OFF (LED off when not in use). Press ENTER to set (or press MENU to exit without making a change).

LED display inversion

To invert the control panel’s LED display so that it is easier to read depending on which way up the fixture is installed:

1. Select menu and press ENTER.

2. Use the DOWN and UP buttons to select (normal display orientation) or (invert display). Press ENTER to set it (or press MENU to exit without making a change).

White balance adjustment

To adjust the white balance mix:

1. Select and press ENTER.

2. Use the DOWN and UP buttons to select

3. Press ENTER to setup.

22

,

RUSH PAR 1 RGBW User Manual

or .