![](http://s1.manualzz.com/store/data/014871686_1-1841fd096382c1a4c1b47c8ed8c9056f-128x128.png)
advertisement
![PAR 1 RGBW User Manual Professional Entertainment Technology | Manualzz PAR 1 RGBW User Manual Professional Entertainment Technology | Manualzz](http://s1.manualzz.com/store/data/014871686_1-1841fd096382c1a4c1b47c8ed8c9056f-360x466.png)
Static color display. Shows one of nine preset colors (select
CoL1 to CoL9, then select a value) or an RGBW color mix
(select Co10, then select colors and values). Sound activation has no effect.
Auto trig. Runs random scenes that change automatically. You can select from three speeds, fast (SP1) to slow (SP3). Sound activation has no effect.
3. When you have selected a show type, press ENTER to set it (or press MENU to exit without making a change).
4. If you want the fixture to automatically enter show mode when it is not receiving a DMX signal, go into the DMX state menu (see ‘DMX state’ on page 21) and activate the show mode option .
Dimmer modes
Four options are available for controlling dimming via DMX:
LINEAR – the increase in light intensity appears to be linear as
DMX value is increased.
SQUARE LAW – light intensity control is finer at low levels and coarser at high levels.
INVERSE SQUARE LAW – light intensity control is coarser at low levels and finer at high levels.
S-CURVE – light intensity control is finer at low levels and high levels and coarser at medium levels.
To set the fixture’s dimmer curve:
1. Select in the display.
and press ENTER to confirm. The currently set mode will blink
2. Use the DOWN and UP buttons to select
.
, , or
20
RUSH PAR 1 RGBW User Manual
advertisement
Related manuals
advertisement
Table of contents
- 5 Safety information
- 10 Introduction
- 10 Before using the product
- 11 Physical installation
- 11 Fastening the fixture to a flat surface
- 11 Mounting the fixture on a truss
- 12 Securing with a safety cable
- 13 AC power
- 14 Linking fixtures to power in a chain
- 15 Fixture overview
- 17 Control data link
- 17 Tips for reliable data transmission
- 18 Connecting the DMX data link
- 18 Fixture setup
- 18 Using the control menus
- 18 DMX addressing
- 19 DMX channel modes
- 19 Show mode
- 20 Dimmer modes
- 21 Sound activation (music trig)
- 21 Microphone sensitivity
- 21 DMX state
- 22 LED display on/off
- 22 LED display inversion
- 22 White balance adjustment
- 23 Manual mode
- 23 Auto test
- 24 Temperature readout
- 24 Fixture operating hours readout
- 24 Firmware version
- 25 Effects
- 25 Color control
- 25 Electronic dimming
- 25 Shutter/Strobe
- 26 Maintenance
- 26 Cleaning
- 27 Replacing the primary fuse
- 27 Service and repairs
- 28 DMX protocols
- 28 4-channel mode
- 28 5-channel mode
- 28 7-channel mode
- 30 Control menus
- 33 Troubleshooting
- 35 Specifications