PAR 1 RGBW User Manual Professional Entertainment Technology

2. Use the UP and DOWN buttons to select a DMX address.

3. Once the address has been selected, press ENTER to set it (or press MENU to exit without making a change).

DMX channel modes

The fixture provides three control modes enabling varying degrees of DMX control and enabling the efficient use of DMX channel bandwidth. The modes are documented in detail in ‘DMX protocols’ on page 28 and summarized briefly here:

DMX channel mode

4 channels

5 channels

7 channels

Description

Individual control of red, green, blue and white channels for color mixing.

Individual control of red, green, blue and white channels for color mixing, plus full range dimming.

Individual control of red, green, blue and white channels for color mixing, plus full range dimming. 32 color presets and strobe effects.

To set the fixture’s DMX channel mode:

1. Select and press ENTER.

2. Use the DOWN and UP buttons to select channel mode.

, or DMX

3. Once the mode has been selected, press ENTER to set it (or press MENU to exit without making a change).

Show mode

Show mode lets you run a standalone light show without a DMX signal. Music trig, static scene and auto trig options are available. To select a show type:

1. Select and press ENTER to enter the show mode menu. The fixture will not respond to DMX while you are in this menu.

2. Use the DOWN and UP buttons to select one of the following types:

Music trig. Runs random scenes in sync with a music beat if you enable sound activation.

RUSH PAR 1 RGBW User Manual

19