PAR 1 RGBW User Manual Professional Entertainment Technology

Linking fixtures to power in a chain

If you obtain a 14 AWG / 1.5 mm

2

power input cable and 14 AWG / 1.5 mm

2 throughput cables from Martin™ (see ‘Accessories’ on page 37), you can relay mains power from one fixture to another by connecting fixtures to power in a linked daisy-chain, MAINS OUT throughput socket to MAINS IN input socket,

Using 14 AWG or 1.5 mm

2

cables from Martin™, you can link:

• Maximum eight (8) RUSH PAR 1 RGBW fixtures in total at 100-120 V, or

• Maximum sixteen (16) RUSH PAR 1 RGBW fixtures in total at 200-240 V.

If you install a power plug on the 14 AWG / 1.5 mm

2

power input cable, install a grounding type (earthed) plug with integral cable grip that is rated minimum

250 V, 16 A.

14

RUSH PAR 1 RGBW User Manual