advertisement
▼
Scroll to page 2
of
40
Temperature readout
To display the fixture’s onboard temperature:
1. Select the unit.
and press ENTER. The display will show the temperature of
2. Press MENU to exit.
Fixture operating hours readout
To display the fixture’s total operating hours counter:
1. Select and press ENTER. The display will show the number of hours the unit has been run.
2. Press MENU to exit.
Firmware version
To display the fixture’s installed firmware version number:
1. Select and press ENTER. The display will show the version of software installed on the fixture.
2. Press MENU to exit.
24
RUSH PAR 1 RGBW User Manual
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 5 Safety information
- 10 Introduction
- 10 Before using the product
- 11 Physical installation
- 11 Fastening the fixture to a flat surface
- 11 Mounting the fixture on a truss
- 12 Securing with a safety cable
- 13 AC power
- 14 Linking fixtures to power in a chain
- 15 Fixture overview
- 17 Control data link
- 17 Tips for reliable data transmission
- 18 Connecting the DMX data link
- 18 Fixture setup
- 18 Using the control menus
- 18 DMX addressing
- 19 DMX channel modes
- 19 Show mode
- 20 Dimmer modes
- 21 Sound activation (music trig)
- 21 Microphone sensitivity
- 21 DMX state
- 22 LED display on/off
- 22 LED display inversion
- 22 White balance adjustment
- 23 Manual mode
- 23 Auto test
- 24 Temperature readout
- 24 Fixture operating hours readout
- 24 Firmware version
- 25 Effects
- 25 Color control
- 25 Electronic dimming
- 25 Shutter/Strobe
- 26 Maintenance
- 26 Cleaning
- 27 Replacing the primary fuse
- 27 Service and repairs
- 28 DMX protocols
- 28 4-channel mode
- 28 5-channel mode
- 28 7-channel mode
- 30 Control menus
- 33 Troubleshooting
- 35 Specifications