advertisement
Fixture overview
1 - Display and control panel
The fixture has two LEDs at the control panel on the rear of the fixture:
DMX On DMX input present
SOUND Flashing Sound activation
The fixture has four buttons at the control panel on the rear of the fixture:
• Activate menus, or
• Return to the previous level of the menu structure, or
MENU
• Hold to exit the menus (this occurs automatically after a period where there has been no user input).
DOWN Go down a menu branch
UP Go up a menu branch
ENTER Confirm the selected function
2 - Microphone
Built-in microphone for triggering sound-activated scene changes in show mode.
RUSH PAR 1 RGBW User Manual
15
3 - Safety cable attachment point
Eyebolt for securing the fixture with a secondary attachment such as a safety cable.
4 - DMX input/output sockets
A 5-pin male XLR socket accepts input from a DMX512 data link. A 5-pin female
XLR output (thru) socket allows the DMX link to be daisy-chained to the next fixture.
5 - Fuse
The fixture’s T 6.3 A fuse is located in a fuseholder next to the display.
6 - Mains power input and output
A blue MAINS IN Neutrik PowerCon socket is provided to connect the fixture to
AC mains power.
See ‘Safety information’ on page 5. The light-grey MAINS OUT Neutrik PowerCon socket can be used to supply power to other fixtures only if the supplied power input cable is replaced as directed in this manual and the safety limits given in this manual are respected.
16
RUSH PAR 1 RGBW User Manual
advertisement