Modem language objects
Explicit exchange management and reports
Introduction
Word objects
This page describes all the language objects that manage explicit exchanges. (See
: PL7 Micro/Junior/Pro ; Communication applications ; Volume 1)
The table below shows the different word objects for the management of explicit exchanges.
Object (1) Function
%MWxy.MOD.0 Module exchanges in progress
%MWxy.MOD.1 Module report
%MWxy.i.0
%MWxy.i.1
Channel exchanges in progress
Channel report
Meaning l l l x0 = 1: reading status in progress x1 = 1: sending of command parameters to the communication module x2 = 1: sending of adjustment parameters to the communication module l l l l x1 = 0: command parameters received and accepted by the module x2 = 0: adjustment parameters received and accepted by the module l x0 = 1: reading status in progress x1 = 1: sending of command parameters to the communication channel x2 = 1: sending of adjustment parameters to the communication channel l l x1 = 0: command parameters received and accepted by the communication channel x2 = 0: adjustment parameters received and accepted by the communication channel
Key
(1) Address xy.i
l l l x: corresponds to the rack number y: corresponds to the module number i: corresponds to the channel number
TLX DS COM PL7 xxE
125
