FIPIO Configuration
How to access the different parameters according to device type
How to access the inputs/ outputs
The following procedure provides information on how to access the input or output parameters of a module. It is enabled in both offline and online mode.
Step
1
2
Action
Access the configuration screen of a FIPIO device.
Select input part or output part from the module zone’s dropdown list.
How to adjust the configuration parameters
The following procedure describes how to modify the adjustment parameters of a module. It is enabled in both offline and online mode.
Step
1
2
3
4
5
6
Action
Access the configuration screen of a FIPIO device.
Select adjustment mode from the module zone’s dropdown list.
Select the cell relating to the entry parameter.
Enter the parameter.
Enable by clicking on Input.
Enable the assignment.
How to assign a module to a PL7 task
The following procedure describes how to assign a module to a PL7 task. It is only enabled in offline mode.
Step
1
2
3
Action
Access the configuration screen of a FIPIO device.
Select MAST
→
or FASTTask from the dropdown list.
Enable the assignment.
TLX DS COM PL7 xxE
273
