%Cn - Activation / deactivation of data compression. Schneider Electric PL7 Micro/Junior/Pro - Communication applications, volume 2

&Yn - Designation of a default profile on reset

Introduction

Parameters

Selects the user profile to be loaded after a hardware reset.

The parameters are:

Code

&Y0

&Y1

Description

The modem uses profile 0.

The modem uses profile 1.

Result codes The following table lists the possible command responses.

Code

OK

ERROR

Description n = 0 to 1.

If n is not in the range 0 to 1.

Appendices

TLX DS COM PL7 xxE

171