Modbus Plus configuration
How to access the Modbus Plus PCMCIA card parameters
Introduction
How to access the link
This operation describes how to access the configuration parameters of the Modbus
Plus link via the intermediary of the PCMCIA cards for TSX Premium PLCs.
The following table shows the procedure for accessing the Modbus Plus link:
Step
1
2
Action
Access the communication channel configuration screen.
Select the communication channel from the drop-down menu CHANNEL 1
Example
CHANNEL 1:
CHANNEL 1 (No PCMCIA submodule)
(Link not configured)
CHANNEL 1
MAST
3 Select the PCMCIA card from the drop-down menu TSX MBP 100 MODBUS+
PCMCIA CARD :
Example
CHANNEL 1
CHANNEL 1 (No PCMCIA submodule)
(Link not configured) MAST
TSX FPP 200 FIPWAY PCMCIA CARD
TSX FPP 10 FIPIO PCMCIA CARD
TSX FPP 100 MODBUS+ PCMCIA CARD
TSX MDM 10 MODEM PCMCIA CARD
FCS SCP 111 RS232 OPEN PCMCIA CARD
FCS SCP 114 RS485 OPEN PCMCIA CARD
196
TLX DS COM PL7 xxE
