General
Compatibility information relating to TBX devices
Introduction
Rules of use
Addressing
The following compatibility information relates to: l l the addressing supported by the different connectable devices, the memory space that the devices take up in the configuration RAM.
If a device linked to a connection port is modular, it must be homogeneous at an application-specific level. Discrete base and extension or analog base and extension (not a mixture of discrete and analog).
The device is only controlled by one PL7 task (FAST or MAST) (no assigning of channel groups of the same TBX to different tasks).
The FIPIO addressing depends on the type of device:
Types of device
Compact TBXs
Sealed TBXs
Modular TBXs
TBX SAP 10
FIPIO addresses
1...31
1...62, 64...127
1...62, 64...127
1...62, 64...127
Comments
TBX C•
TBX E•
TBX LEP 020, TBX LEP 030
AS-i gateway
Maximum configuration
The number of modules of the same reference connected to the FIPIO bus in a configuration is limited. The values in the table below are expressed in bytes.
Module Base
AES 200, ASS 400
AMS 620
1332
1332
1152
Extension Maximum number of connection points
TSX P57
153
TSX P57
253/2823/
353
TSX P57
453/4823
272
528
For 2 or 4 channels
62 70
For 8 channels
59 59
125
126
-
For 10 or 12 channels
50 50
31 31
114
31 CEP 1622, CSP 1622,
CSP 1625
DES •••, DMS •••, DSS •••
SAP 10
1152
1088
144
-
62
52
81
52
126
117
240
TLX DS COM PL7 xxE
