FIPIO Debugging
FIPIO bus device debugging screen
Introduction
Illustration
1
By opening the application screen of a device in debugging mode, the following l l l l l functions can be accessed: parameter display module configuration, reading, writing, and saving adjustment parameters, reading, writing, and forcing the inputs/outputs, aperiodic status data reading, command word writing,
The screen dedicated to devices looks like this:
TSX DMS 1025 [FIPIO1 MODULE 0]
Debugging
Designation: TBX7 EMB.8E/2SR24Vdc Version: 1.0
Global unforcing
RUN
Inputs
ERR IO DIAG...
2
Chan.
6
7
4
5
2
3
0
1
Symbol
0
0
0
0
0
0
0
0
State Error
DIAG...
DIAG...
DIAG...
DIAG...
DIAG...
DIAG...
DIAG...
DIAG...
Channel control
Forcing
F4 Force to 0
F5
F6
Force to 1
Unforce x
292
TLX DS COM PL7 xxE
Elements and functions
FIPIO Debugging
This table describes the different areas that make up the configuration screen:
Address Zone
1 common
2 specific
Function
See (See : PL7 Micro/Junior/Pro ; Communication applications
; Volume 1).
is used to access device debugging or device adjustment parameters.
The accessible parameters are device type functions.
Specific parameters
For input/output type modules, the specific zone displays the value and state of each of the module channels in real time and provides access to the commands from one channel.
For the other module types, the specific zone displays the bus management periodic exchange data.
TLX DS COM PL7 xxE
293
FIPIO Debugging
294
TLX DS COM PL7 xxE
