Checking Drives. Buffalo Tech TeraStation 5000

4

When the following message is displayed, it is safe to unplug the drive.

Note: To remount the drive, unplug it and then plug it back in.

Checking Drives

A disk check tests the data on a drive in the TeraStation or connected via USB for integrity. Errors are fixed automatically.

With large drives, a disk check may run for many hours. Shared folders cannot be accessed during a disk check. Do not turn off the TeraStation until the disk check is finished. Use the procedure below to run a disk check.

1

In Settings, click Drives.

2

Select Drives to check an internal drive or USB Drives to check an external drive.

3

Select the drive to test, then click Check Disk.

47