advertisement
6
Connect the second LAN port to the switch or hub.
7
Reboot the TeraStation before use.
Connecting a Printer
You can connect a printer to the USB port on the TeraStation.
Notes:
• Only one USB printer can be connected to the TeraStation.
• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status information is not supported.
• If a multifunctional printer is connected, only the printer function can be used. Other functions such as scanning will not be available.
• The print server does not support Mac OS.
• Don’t disable the SMB protocol while the print server is enabled. If you do, you will need to enable SMB again and reconfigure the print server from scratch.
Setting Up a Printer with Windows 8.1, Windows 8, Windows 7, or Windows Vista
1
In Settings, click Services.
2
Move the print server switch to the position to enable the print server.
3
Refer to the manual supplied with the printer and install the printer drivers.
4
Click Start - Network.
For Windows 8.1 and Windows 8, click the Network in File Explorer.
5
Double-click the TeraStation server name.
142
6
Double-click the icon of the connected printer (shared name is displayed).
7
Select your printer, then click OK.
8
Register the printer.
Setting Up a Printer with Windows XP
1
In Settings, click Services.
2
Move the print server switch to the position to enable the print server.
3
Refer to the manual supplied with the printer.
4
Click Start - Control Panel.
5
Click Network and Internet Connections.
6
Click My Network Places- View workgroup computers - (Name of the TeraStation Server).
7
Double-click your printer icon.
8
When “The server for the printer does not have the correct printer driver installed. If you want to search for the proper driver, Click OK.” displays, click OK.
143
advertisement
Related manuals
advertisement