advertisement
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
iSCSI Connection Tool
The iSCSI Connection Tool is a Windows utility that lets you use the TeraStation as an iSCSI drive.
To launch it,click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool.
For Windows 8.1 and Windows 8, click the iSCSI Connection Tool.
Name
Target
Model
Series
IP Address
Subnet Mask
Firmware
MAC Address iSCSI Service
Volume
Current status
User authorization
Connect on Start Up
Description
If a TeraStation is selected, clicking Register iSCSI Device will register all the volumes in the TeraStation to the computer for enabling connection to individual volumes.
If a volume is already registered, click Unregister iSCSI Device to unregister all volumes, disconnecting them from the TeraStation.
Displays TeraStation’s model name.
Displays TeraStation’s series name.
Displays TeraStation’s IP address.
Displays TeraStation’s subnet mask.
Displays TeraStation’s firmware version.
TeraStation’s MAC address.
Shows whether the iSCSI service of the TeraStation is running or stopped.
Select individual volumes from a registered TeraStation.
Select a volume and click Connect, then the selected volume will be recognized as a local drive in My Computer on your computer. If a volume is connected, click Unregister to disconnect it.
Displays current status of the selected volume.
- Disconnected: Volume is disconnected.
- Connected: Volume is connected.
- Connected to another PC: Volume is connected to another computer.
Displays the other computer’s IP address.
- Disabled:No authentication.
- Enabled:User authentication is needed to connect to a volume.
If selected, the computer will connect to the volume automatically at boot.
172
Refresh
Exit
Menu
Name
File
Refresh
Exit
Configuration
Change IP address
Unregister iSCSI device
Setup
Help
Set mutual CHAP secret
Persistent Volume
Connect volumes
Disconnect volumes
Disk management
About
Search for network devices on the LAN.
Exit iSCSI Connection Tool.
Description
Search for network devices on the LAN.
Closes the iSCSI Connection Tool.
Opens Settings for the selected TeraStation.
You can change the IP address of the selected TeraStation.
If you disconnect the TeraStation without unregistering it or changing its IP address, the registration information stays in your computer and searches will take longer. For better performance, unregister disconnected
TeraStations with this command.
Set the CHAP password on the computer side.
If checked, your computer will reconnect to the TeraStation whenever it’s restarted.
Connect multiple volume at a time.
Displays the screen to disconnect multiple volume at a time.
Format drives.
Displays version information.
173
advertisement
Related manuals
advertisement