advertisement
5
Select “Transfer settings from a USB drive”, then click Execute.
Restoring Factory Defaults
Initializing from Settings
To initialize the TeraStation to its factory defaults from Settings, follow this procedure.
1
In Settings, click Management.
2
Click to the right of “Restore/Erase”.
3
Click Initialize TeraStation.
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.
5
The TeraStation will be restored to its factory default settings.
Creating an Initialization Drive
A system initialization drive will restore the settings on your TeraStation to their factory defaults. You can initialize them without logging in to Settings. Follow the steps below to create a system initialization drive.
Notes:
• Normally, making and using the system initialization drive will not affect data. However, always back up your data regularly!
• This USB drive can be used to recover the system if your TeraStation doesn’t boot at all. In this case, if the data partition is damaged, then all your data will be deleted by the recovery process.
1
Insert a 1 GB or larger USB flash drive (not included) into a USB 2.0 port on the TeraStation.
156
advertisement
Related manuals
advertisement