advertisement
Disk Quotas
Notes:
• When using quotas, disable the recycle bin or empty the trash folder often. The limited space includes the space used for trash.
• Quotas apply per drive or per array. If a quota is set to 1 GB, each array or drive can use a maximum of 1 GB.
• Quotas cannot be set for external hard drives connected to the TeraStation and hard drives that are configured as media cartridges.
• If both user and group quotas are configured for a user, the most restrictive quota will always apply.
Quotas for Users
Follow this procedure to limit the shared folder disk space available for a user.
1
In Settings, click to the right of “Users”.
2
Select the user whose space will be limited.
3
Enable quotas, choose the maximum space the user will be allowed to use, and click OK.
Note: If you change the primary group, restart the TeraStation to apply the quota settings.
4
Click Close.
Quotas for Groups
Follow the procedure below to limit the space for shared folders that each group can use.
1
In Settings, click to the right of “Groups”.
2
Select the group whose space will be limited.
3
Enable quotas, choose the maximum space the group is allowed, and click OK.
52
4
Click Close.
5
In Settings, click to the right of “Users”.
6
Change the user’s primary group to the group with the quota, then click OK.
7
Click Close.
Size Limits
If LVM is enabled,volumes can be created with maximum size limits.
1
In Settings, click Drives.
2
Select LVM.
3
Select the drive or array where the volume will be located and click Enable LVM on Volume.
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK.
5
Click OK.
6
Click Edit under “NAS Volume”.
53
7
Click Create Volume.
8
Configure the desired settings, then click OK.
9
Click OK.
10
Click Close.
11
Click Close.
12
Navigate to File Sharing - Folder Setup.
13
Click Create Folder.
54
advertisement
Related manuals
advertisement