Rider footrests. KTM 1290 Super Adventure, 1290 Super Adventure 2016

8 ERGONOMICS

8.8

Rider footrests

The rider footrests can be mounted in one of two positions.

Possible states

• Rider footrests, low

• Rider footrests, high





M00822-10

8.9

Adjusting the footrests

Info

The operations on the footrest brackets are the same for the left and right sides.

–

Remove screw  .

The foot brake lever swings up to the stop.

M00823-10

83

8 ERGONOMICS

–

Remove cotter pin

 with washer

–

Carefully remove the pin





.

of the rider footrest.

Info

The spring is under high tension and can pop out when the pin is removed.

–

Take off the rider footrest  with the spring.

84

M00824-10

–

Remove screws



.

M00826-10

–

Adjust the footrest bracket to the desired position.

M00827-01

8 ERGONOMICS

–

Mount and tighten screws



.

Guideline

Screw, front footrest bracket M8 25 Nm

(18.4 lbf ft)

Loctite ® 243™

M00826-10

–

Mount the rider footrest with spring

 and pin



.

Pliers for footrest spring (58429083000)

–

Mount washer

 and cotter pin



.

85

M00825-10

–

Position the foot brake lever.

–

Mount and tighten screw



.

Guideline

Screw, ball joint of push rod on foot brake cylinder

M6

M00823-10

10 Nm

(7.4 lbf ft)

Loctite ® 243™