operation. KTM 1290 Super Adventure, 1290 Super Adventure 2016

20 CLEANING, CARE

224

Special cleaner for glossy and matte paint finishes, metal and plastic surfaces

( p. 247)

–

Oil the ignition/steering lock, tank lock, and seat lock.

Universal oil spray ( p. 247)

20.2

Checks and maintenance steps for winter operation

Info

If you use the motorcycle in winter, you must expect salt on the roads. You should therefore take precautions against aggressive road salt.

If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance the corrosive effects of salt.

401060-01

–

Clean the motorcycle. ( p. 222)

–

Clean the brakes.

Info

After

EVERY

trip on salted roads, thoroughly wash the brake calipers and brake linings with cold water and dry carefully. This should be done after the parts are cooled down and while they are installed.

After riding on salted roads, thoroughly wash the motorcycle with cold water and dry it well.

–

Treat the engine, the swingarm, and all other bare or galvanized parts (except brake discs) with a wax-based corrosion inhibitor.

Info

Corrosion inhibitor must not come into contact with the brake discs. This would severely lower the braking effect.

20 CLEANING, CARE

–

Clean the chain. ( p. 119)

225