16.16 Activating/deactivating the ignition key. KTM 1290 Super Adventure, 1290 Super Adventure 2016

16 ELECTRICAL SYSTEM

–

Set the upper segment on the left marking.

Guideline

The light-dark boundary of the upper segment must run exactly through the right marking.

–

Press the

SET

button.

The cornering light is switched off.

204

402428-01

16.16

Activating/deactivating the ignition key

Info

The orange programming key must only be used for activating and deactivating!

If a black ignition key is lost or needs to be replaced, the individual black ignition keys need to be enabled or disabled using the orange programming key. This prevents the vehicle from being operated with the lost black ignition key.

You can activate or deactivate up to four black ignition keys. Only the black ignition keys programmed during an activation procedure are valid. All black ignition keys not programmed during the activation procedure are invalid, but can be reprogrammed in a further activation procedure.

16 ELECTRICAL SYSTEM

Loss of a black ignition key (additional black ignition keys are available):

The following procedure deactivates all activated black ignition keys that are not included in the procedure.

–

Press the emergency OFF switch to the position

ON

.

205

401114-10

K00007-01

–

Insert the orange programming key in the ignition lock.

–

Switch on the ignition by turning the orange programming key to the

ON

position .

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

–

Insert the black ignition key in the ignition lock.

–

Switch on the ignition by turning the black ignition key to the position

ON

.

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the black ignition key to the position

OFF

.

–

Remove the black ignition key.

–

Insert the orange programming key in the ignition lock.

–

Switch on the ignition by turning the orange programming key to the

ON

position .

The immobilizer indicator lamp flashes according to the number of functional black ignition keys including the orange programming key. In this case, it flashes twice.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

The lost black ignition key is deactivated.

16 ELECTRICAL SYSTEM

The existing black ignition key is reactivated.

Loss of all black ignition keys (no black ignition keys are available):

This procedure is important to prevent misuse of the lost black ignition key.

–

Press the emergency OFF switch to the position

ON

.

206

401114-11

K00007-01

–

Insert the orange programming key in the ignition lock.

–

Switch on the ignition by turning the orange programming key to the

ON

position .

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Switch on the ignition by turning the orange programming key to the

ON

position .

The immobilizer indicator lamp flashes according to the number of functional black ignition keys including the orange programming key. In this case, it flashes once since all black ignition keys are deactivated.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

All black ignition keys are deactivated.

–

Order a new black ignition key according to the key number on the

KEYCODECARD

and activate it.

To activate up to three black ignition keys:

–

Press the emergency OFF switch to the position

ON

.

–

Insert the orange programming key in the ignition lock.

16 ELECTRICAL SYSTEM

207

–

Switch on the ignition by turning the orange programming key to the

ON

position .

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

–

Insert the black ignition key in the ignition lock.

–

Switch on the ignition by turning the black ignition key to the position

ON

.

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the black ignition key to the position

OFF

.

–

Remove the black ignition key.

–

If two other black ignition keys are to be activated, repeat the last steps with the respective ignition key.

–

If the last black ignition key was activated, insert the orange programming key into the ignition lock.

–

Switch on the ignition by turning the orange programming key to the

ON

position .

The immobilizer indicator lamp flashes according to the number of functional black ignition keys including the orange programming key.

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

Info

Activation of the ignition key is finished.

To activate four black ignition keys:

–

Press the emergency OFF switch to the position

ON

.

–

Insert the orange programming key in the ignition lock.

–

Switch on the ignition by turning the orange programming key to the

ON

position .

Immobilizer indicator lamp lights up.

16 ELECTRICAL SYSTEM

208

–

Switch off the ignition by turning the orange programming key to the

OFF

position .

–

Pull out the orange programming key.

–

Insert the black ignition key in the ignition lock.

–

Switch on the ignition by turning the black ignition key to the position

ON

.

Immobilizer indicator lamp lights up.

–

Switch off the ignition by turning the black ignition key to the position

OFF

.

–

Remove the black ignition key.

–

If three other black ignition keys are to be activated, repeat the last steps with the respective ignition key.

Info

After the fourth black ignition key has been activated, programming is finished.