Changing the fuses in the fuse box. KTM 1290 Super Adventure, 1290 Super Adventure 2016

16 ELECTRICAL SYSTEM

–

Position rear fairing



.

Heat protector is correctly positioned.

–

Mount and tighten screws



.

Guideline

Screw, cover part M5

M00840-10

Finishing work

–

Mount the front rider's seat. ( p. 117)

–

Mount the passenger seat. ( p. 115)

–

Set the time and date.

16.7

Changing the fuses in the fuse box

Warning

Fire hazard

The electrical system can be overloaded if the wrong fuses are used.

–

Use only fuses with the prescribed amperage. Never bypass or repair fuses.

Info

The fuse box containing the fuses of individual power consumers is located under the seat.

Preparatory work

–

Switch off all power consumers and switch off the engine.

–

Remove the passenger seat. ( p. 114)

–

Remove the front rider's seat. ( p. 116)

3.5 Nm

(2.58 lbf ft)

189

16 ELECTRICAL SYSTEM

Main work

–

Open fuse box cover  .

M00843-10

V00102-10

–

Check the fuses.

Info

A defective fuse is indicated by a burned-out fuse wire



.

–

Remove the defective fuse.

Guideline

Fuse

res

- 10 A - spare fuse

Fuse

res

- 15 A - spare fuse

Fuse

1

- 10 A - power supply for control units and components

Fuse

2

- 10 A - socket (ACC1)

Fuse

3

- 15 A - ABS hydraulic unit

Fuse

4

- 25 A - ABS return pump

Fuse

5

- 15 A - semi-active suspension

–

Use spare fuses with the correct rating only.

Fuse (58011109110) ( p. 237)

Fuse (58011109115) ( p. 237)

190