Running in the engine. KTM 1290 Super Adventure, 1290 Super Adventure 2016

9 PREPARING FOR USE

90

Warning

Danger of accidents

Failure of brake system.

–

If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take your foot off the foot brake lever when you are not braking.

Info

When using your vehicle, remember that others may feel disturbed by excessive noise.

–

Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.

You receive a delivery certificate and the Service and Warranty Booklet at vehicle handover.

–

Before your first trip, read the entire Owner's Manual carefully.

–

Get to know the controls.

–

Adjust the motorcycle to your requirements, as described in the "Ergonomics" chapter.

–

Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and in a standing position to get a better feeling for the motorcycle.

–

Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.

–

Run the engine in.

9.2

Running in the engine

–

During the running-in phase, do not exceed the specified engine speed.

Guideline

Maximum engine speed

During the first: 1,000 km (620 mi)

After the first: 1,000 km (620 mi)

6,500 rpm

10,250 rpm

–

Avoid fully opening the throttle!