13.29 Removing the engine guard. KTM 1290 Super Adventure, 1290 Super Adventure 2016

13 SERVICE WORK ON THE CHASSIS

13.29

Removing the engine guard

–

Remove screws  and engine guard  .

V00094-10

13.30

Installing the engine guard

–

Position engine guard



. Mount and tighten screws



.

Guideline

Screw, engine guard M6 10 Nm (7.4 lbf ft)

V00094-11

151

13 SERVICE WORK ON THE CHASSIS

13.31

Removing the crash bar

–

Remove screw connections  .

V00113-10

–

Remove screws  and take off the clamp halves.

–

Remove screw



.

–

Take off the left crash bar.

V00095-10

152

13 SERVICE WORK ON THE CHASSIS

–

Remove screws

–

Remove screw





.

and take off the clamp halves.

–

Take off the right crash bar.

V00097-10

13.32

Installing the crash bar

V00098-10

–

Position the right crash bar with the frame protector.

The fuel tank support ring should be correctly positioned on the fuel tank.

Info

Cover the components to protect them against damage.

–

Mount screw



, but do not tighten yet.

Guideline

Remaining chassis screws M8 25 Nm

(18.4 lbf ft)

–

Mount screws



, but do not tighten yet.

Guideline

Remaining chassis screws M6 10 Nm (7.4 lbf ft)

153

13 SERVICE WORK ON THE CHASSIS

–

Position the left crash bar with the frame protector.

The fuel tank support ring should be correctly positioned on the fuel tank.

Info

Cover the components to protect them against damage.

–

Mount screw



, but do not tighten yet.

Guideline

Remaining chassis screws

V00096-10

M8 25 Nm

(18.4 lbf ft)

V00113-11

–

Mount screws



, but do not tighten yet.

Guideline

Remaining chassis screws

–

Mount and tighten fittings



.

Guideline

Remaining chassis screws

M6

M6

The crash bars are evenly aligned with each other.

–

Tighten all the screws of the crash bar.

Guideline

Remaining chassis screws M6

Remaining chassis screws M8

154

10 Nm (7.4 lbf ft)

10 Nm (7.4 lbf ft)

10 Nm (7.4 lbf ft)

25 Nm

(18.4 lbf ft)