Changing the main fuse. KTM 1290 Super Adventure, 1290 Super Adventure 2016

16 ELECTRICAL SYSTEM

–

Set the time and date.

16.6

Changing the main fuse

Warning

Fire hazard

The electrical system can be overloaded if the wrong fuses are used.

–

Use only fuses with the prescribed amperage. Never bypass or repair fuses.

Preparatory work

–

Switch off all power consumers and switch off the engine.

–

Remove the passenger seat. ( p. 114)

–

Remove the front rider's seat. ( p. 116)

Main work

–

Remove screws

–

Raise rear fairing



.

 slightly.

M00840-10

187

16 ELECTRICAL SYSTEM

–

Remove protection caps



.

M00841-10

M00842-10

–

Remove the faulty main fuse



.

Info

A defective fuse is indicated by a burned-out fuse wire  .

A spare fuse  is located in the starter relay.

The main fuse protects all power consumers of the vehicle.

–

Install a new main fuse.

Fuse (58011109130) ( p. 237)

–

Check that the electrical equipment is functioning properly.

–

Mount the protection caps.

Tip

Insert a new spare fuse into the starter relay to have it available when needed.

188