Switch the device on and off. Microsoft N86 8MP

14 damage the card and the device and corrupt data stored on the card.

Insert the memory card

A memory card may be already inserted in the device.

If not, do the following:

1.

With the back of the device facing you, lift up the cover.

2.

Insert a compatible memory card in the slot. Ensure that the contact area on the card is facing down and towards the slot.

3.

Push the card in. You can hear a click when the card locks into place.

4.

Close the back cover.

Ensure that the cover is properly closed.

Remove the memory card

Important: Do not remove the memory card during an operation when the card is being accessed.

Doing so may damage the memory card and the device, and corrupt data stored on the card.

1.

Before you remove the card, press the power key, and select Remove memory card . All applications are closed.

2.

When Removing memory card will close all open applications. Remove anyway?

is displayed, select Yes .

3.

When Remove memory card and press 'OK' is displayed, remove the back cover of the device.

4.

Press the memory card to release it from the slot.

5.

Pull out the memory card. If the device is switched on, select OK .

6.

Replace the back cover. Ensure that the cover is properly closed.

Switch the device on and off

To switch on the device:

1.

Press and hold the power key.

2.

If the device asks for a PIN code or lock code, enter it, and select OK .

The preset lock code is 12345. If you forget the code and your device is locked, your device will require service and additional charges may apply. For more information, contact a Nokia Care point or your device dealer.