Connection manager. Microsoft N86 8MP

device to another access point that belongs to the same WLAN. As long as you remain within range of access points that belong to the same network, your device can stay connected to the network.

Tip: To check the unique media access control

(MAC) address that identifies your device, for example to configure the MAC address of your device to a WLAN router, enter *#62209526# on the home screen. The MAC address is displayed.

See WLAN availability

To set your device to show wireless LAN (WLAN) availability, select Menu > Tools > Settings and

Connection > Wireless LAN > Show WLAN availability .

If a WLAN is available, is displayed.

WLAN wizard

Select Menu > Tools > Connectivity > WLAN wiz.

.

The WLAN wizard helps you find and connect to a wireless LAN (WLAN). When you open the application, your device starts to scan for available WLANs and lists them.

Select Options and from the following:

● Refresh — Update the list of available WLANs.

● Filter WLAN networks — Filter out WLANs in the list of found networks. The selected networks are filtered out the next time the application searches for WLANs.

● Start web browsing — Start browsing the web using the access point of the WLAN.

● Cont. web browsing — Continue web browsing using the currently active WLAN connection.

● Disconnect WLAN — Disconnect the active connection to the WLAN.

● Details — View the details of the WLAN.

Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorized access to your data.

Connection manager

Active data connections

Select Menu > Tools > Connectivity > Conn.

mgr.

.

Select Active data connections .

In the active data connections view, you can see the open data connections:

data calls

packet data connections 51