Walk to your destination. Microsoft N86 8MP

80

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

Walk to your destination

Select Menu > Maps .

Walk to a destination — Select Set destination and the appropriate option.

Walk to your home — Select Walk home .

When you select Drive home or Walk home for the first time, you are prompted to define your home location. To later change the home location, do the following:

1.

In the main view, select Options > Settings >

Navigation > Home Location > Change >

Redefine .

2.

Select the appropriate option.

Tip: To walk without a set destination, select

Map . Your location is displayed on the center of the map as you move.

Plan a route

Select Menu > Maps .

Create a route

1.

In the map view, go to your starting point.

2.

Press the scroll key, and select Add to route .

3.

To add another route point, select Add new route point and the appropriate option.

Change the order of the route points

1.

Go to a route point.

2.

Press the scroll key, and select Move .

3.

Go to the place where you want to move the route point to, and select OK .

Edit the location of a route point — Go to the route point, press the scroll key, and select Edit and the appropriate option.

View the route on the map — Select Show route .

Navigate to the destination — Select Show route > Options > Start driving or Start walking .

Change the settings for a route

The route settings affect the navigation guidance and the way the route is displayed on the map.

1.

In the route planner view, open the Settings tab. To get to the route planner view from the navigation view, select Options > Route pts.

or Route point list .

2.

Set the transportation mode to Drive or Walk . If you select Walk , one-way streets are regarded as normal streets, and walkways and routes through, for example, parks and shopping centers, can be used.