During a video call. Microsoft N86 8MP

The secondary camera on the front is used by default for video calls. Starting a video call may take a while. Waiting for video image is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible), you are asked if you want to try a normal call or send a text or multimedia message instead.

The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you only hear the sound and may see a still image or a grey background graphic.

3.

To end the video call, press the end key.

During a video call

To change between showing video or hearing the voice of the caller only, select Options > Enable , or

Disable and the desired option.

Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To activate the loudspeaker, select

Options > Activate loudspeaker . If you have attached a compatible headset with Bluetooth connectivity, to route the sound to the headset, select

Options > Activate BT handsfree .

To switch back to the handset, select Options >

Activate handset .

To use the camera in the back of your device to send video, select Options > Use secondary camera . To switch back to the camera in the front of your device, select Options > Use main camera .

To take a snapshot of the video you are sending, select

Options > Send snapshot . Video sending is paused and the snapshot is shown to the recipient. The snapshot is not saved.

To zoom your image in or out, select Options >

Zoom .

To change the video quality, select Options > Video preference > Normal quality , Clearer detail or

Smoother motion .

Answer or decline a video call

When a video call arrives, is displayed.

To answer the video call, press the call key. Allow video image to be sent to caller?

is displayed. To start sending live video image, select Yes .

If you do not activate the video call, you only hear the sound of the caller. A grey screen replaces the video image. To replace the grey screen with a still image captured by the camera in your device, select Menu >

111