Your device. Microsoft N86 8MP

Your device

Phone setup

When you switch on your device for the first time, the

Phone setup application opens.

To access the Phone setup application later, select

Menu > Tools > Phone setup .

To set up the device connections, select Settings wizard .

To transfer data to your device from a compatible

Nokia device, select Phone switch .

The available options may vary.

Nokia Switch

Transfer content

You can use the Switch application to copy content such as phone numbers, addresses, calendar items, and images from your previous Nokia device to your device.

The type of content that can be transferred depends on the model of the device from which you want to transfer content. If that device supports synchronization, you can also synchronize data between the devices. Your device notifies you if the other device is not compatible.

If the other device cannot be switched on without a

SIM card, you can insert your SIM card in it. When your device is switched on without a SIM card, the Offline profile is automatically activated, and transfer can be done.

Transfer content for the first time

1.

To retrieve data from the other device for the first time, on your device, select Phone switch in the

Welcome application, or select Menu > Tools >

Switch .

2.

Select the connection type you want to use to transfer the data. Both devices must support the selected connection type.

3.

If you select Bluetooth connectivity as the connection type, connect the two devices. To have your device search for devices with Bluetooth connectivity, select Continue . Select the device from which you want to transfer content. You are asked to enter a code on your device. Enter a code

(1-16 digits), and select OK . Enter the same code on the other device, and select OK . The devices are now paired.

23

24

Some earlier Nokia devices may not have the Switch application. In this case, the Switch application is sent to the other device as a message. To install the

Switch application on the other device, open the message, and follow the instructions on the display.

4.

On your device, select the content you want to transfer from the other device.

When the transfer has started, you can cancel it and continue later.

Content is transferred from the memory of the other device to the corresponding location in your device.

The transfer time depends on the amount of data to be transferred.

Synchronize, retrieve, or send content

Select Menu > Tools > Switch .

After the first transfer, select from the following to start a new transfer, depending on the model:

to synchronize content between your device and the other device, if the other device supports synchronization. The synchronization is two-way. If an item is deleted in one device, it is deleted in both. You cannot restore deleted items with synchronization.

to retrieve content from the other device to your device. With retrieval, content is transferred from the other device to your device. You may be asked to keep or delete the original content in the other device, depending on the device model.

to send content from your device to your other device

If you cannot send an item, depending on the type of the other device, you can add the item to the Nokia folder, to C:\Nokia or E:\Nokia in your device. When you select the folder to transfer, the items are synchronized in the corresponding folder in the other device, and vice versa.

Use shortcuts to repeat a transfer

After a data transfer, you can save a shortcut with the transfer settings to the main view to repeat the same transfer later.

To edit the shortcut, select Options > Shortcut settings . For example, you can create or change the name of the shortcut.

A transfer log is shown after every transfer. To view the log of the last transfer, select a shortcut in the main view and Options > View log .

Handle transfer conflicts

If an item to be transferred has been edited in both devices, the device attempts to merge the changes automatically. If this is not possible, there is a transfer conflict. Select Check one by one , Priority to this phone , or Priority to other phone to solve the conflict.