Make calls. Microsoft N86 8MP

Make calls

Voice calls

1.

In the standby mode, enter the phone number, including the area code. To remove a number, press

C.

For international calls, press * twice for the + character (which replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

The character + as a replacement for the international access code may not work in all regions. In this case, enter the international access code directly.

2.

To make the call, press the call key.

3.

To end the call (or to cancel the call attempt), press the end key.

Pressing the end key always ends a call, even if another application is active.

To make a call from Contacts, select Menu >

Contacts . Scroll to the desired name, or enter the first letters of the name to the search field. To call the contact, press the call key. If you have saved several numbers for a contact, select the desired number from the list, and press the call key.

Options during a call

To adjust the volume during a call, use the volume key on the side of your device. You can also use the scroll key. If you have set the volume to Mute , select

Unmute first.

To send an image or a video clip in a multimedia message to the other participant of the call, select

Options > Send MMS (in UMTS networks only). You can edit the message and change the recipient before sending. Press the call key to send the file to a compatible device (network service).

To put an active voice call on hold while answering another incoming call, select Options > Hold . To switch between the active and the held call, select

Options > Swap .

To send touch tone strings (for example, a password), select Options > Send touch tones . Enter the touch tone string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press * repeatedly. To send the tone, select OK . You can add touch tones to the phone number or touch tone fields in a contact card.

107