Concrete Detailing - Tekla User Assistance

Use for

Option Description

Beam end rests on the column.

Beam end rests on the column.

Selection order

1. Select the main part (column).

2. Select the secondary part (beam/wall/panel).

See also

Column - beam (14): Picture tab (page 39)

Column - beam (14): Column tab (page 43)

Column - beam (14): Picture tab

Use the Picture tab to define cut-out shapes and cut-out dimensions of the column and the beam in Column - beam (14).

Concrete Detailing 39 Beam and column connections

Cut-out dimensions

Option Description

Cut-outs of the main part and the secondary part in the horizontal direction.

The space between the column and the beam can be defined at both sides. For tapered openings you can define how much the opening is reduced.

Example:

Cut-outs of the main part and the secondary part in the vertical direction.

The space between the column and the beam can be defined at both sides. For tapered openings you can define how much the opening is reduced.

Example:

Concrete Detailing 40 Beam and column connections

Option Description

Select the how the opening is reduced.

The options are:

• From beam centerline

• From beam edges

Cut-out shape

Option Description

Cut around the secondary part

Concrete Detailing 41 Beam and column connections

Option Description

Cut-out to the top of the column

Cut-out to the bottom of the column

Concrete Detailing 42 Beam and column connections