Concrete Detailing - Tekla User Assistance

Option

Add steel plate to the column by

Description

Select how the steel plate is attached to the column.

Default is Weld.

Concrete console (111): Anchor tab

Use the Anchor tab to define the properties of the anchor rods, nuts and washers and injection tubes and select how these parts are connected to the console or the main part in Concrete console (111).

Option

Anchor rods

Description

Anchor rod profile.

Define the length and number of rods on the Anchor

rods tab.

Select the reinforcing bar type.

Type of reinforcing bars

Anchors to Select to which part the anchor rods are attached, and how the anchors are attached.

Default is Column and Weld.

Select whether the anchor rods have the same length.

Anchors all the same L

Washer

Nut

Weld washer and nut to anchor

Tube top

Tube bottom

Washer profile.

Define the thickness of the washer on the Anchor

rods tab.

Nut profile.

Define the height of the nut on the Anchor rods tab.

Select whether washers and nuts are welded to the anchors.

Tubular embed for creating a round hole for the anchors.

The tube top starts at the bottom level of the nut.

Tubular embed for creating a round hole for the anchors.

Tubes around anchors to beam

The height of the tubular profile can be modified on the Anchor rods tab.

Select how the tubes around the anchors are attached to the beam.

Default is Weld.

Tubes all the same L Select whether the tubes have the same length.

Concrete Detailing 68 Beam and column connections