advertisement
Anchor (10)
Anchor (10) connects two precast concrete parts, for example, two panels or a column to a panel. The precast concrete parts are connected with L profiles and with embedded connection profiles that act as anchors, for example, custom component bolt anchors or cast-in channels. The bolt anchors and the cast-in channels can be single-sided or double-sided. Additionally, seams can be defined between the main part and the secondary parts.
Objects created
• Anchors (bolt anchors or cast-in channels)
• L profiles
• Bolts
Concrete Detailing 113 Panels and walls
Use for
Situation Description
Connection with L profiles and bolt anchors.
Connection with L profile and cast-in channel.
Selection order
1. Select the main part (precast concrete panel or a column).
2. Select the secondary part (precast concrete panel).
The connection is created automatically when the secondary part is selected.
See also
Anchor (10): Picture tab (page 115)
Anchor (10): Anchors tab (page 117)
Anchor (10): Conn profile tab (page 120)
Anchor (10): Bolts tab (page 123)
Concrete Detailing 114 Panels and walls
advertisement
Related manuals
advertisement
Table of contents
- 13 Concrete Detailing
- 13 Seating connections
- 14 Seating with dowel (75)
- 16 Defining bolt hole dimensions
- 16 Fitting the beam or column (75)
- 17 Defining grout (75, 76)
- 17 Chamfering corbels
- 18 Creating a recess (75, 76)
- 18 Defining recess dimensions
- 18 Bearing plate position (75, 76)
- 19 Two-sided seating with dowel (76)
- 21 Fitting beam or column (76)
- 21 Shaping beam ends (76, 78)
- 21 Seating with dowel to flange (77)
- 23 Creating a recess (77, 78)
- 23 Two-sided seating with dowel to flange (78)
- 25 Beam and column connections
- 26 Battering connection (13)
- 27 Corbel connection (14)
- 29 Corbel connection (14): Picture tab
- 33 Corbel connection (14): Parts tab
- 34 Corbel connection (14): Reinforcing bar tab
- 38 Column - beam (14)
- 39 Column - beam (14): Picture tab
- 43 Column - beam (14): Column tab
- 45 Corbels and recesses (82)
- 45 Corbels and recesses (82): Part 1 / Part 2 / Part 3 / Part 4 tab
- 51 Corbels and recesses (82): Configuration tab
- 51 Concrete console (110)
- 52 Concrete console (110): Picture tab
- 56 Concrete console (110): Parts tab
- 58 Concrete console (110): Connection tab
- 59 Concrete console (110): Parameters tab
- 60 Concrete console (110): Anchor rods tab
- 63 Concrete console (110): Socket tab
- 63 Concrete console (111)
- 65 Concrete console (111): Picture tab
- 65 Concrete console (111): Parts tab
- 68 Concrete console (111): Anchor tab
- 69 Concrete console (111): Anchor rods
- 71 Concrete console (111): Socket tab
- 72 Concrete beam-beam (112)
- 73 Picture tab
- 82 Parts tab
- 84 Anchors tab
- 85 Parameters tab
- 86 Anchor rods tab
- 98 Socket tab
- 99 Rebars in primary tab / Rebars in secondary tab
- 101 General tab / Analysis tab
- 101 Panels and walls
- 101 Wall to wall connection
- 102 Wall to wall connection: Edge shape tab
- 103 Wall to wall connection: Extra teeth tab
- 104 Wall to wall connection: Connectors tab
- 107 Wall groove seam detail
- 108 Wall groove seam detail: Edge shape tab
- 109 Wall groove seam detail: Extra teeth tab
- 110 Wall groove seam detail: Connectors tab
- 113 Anchor (10)
- 115 Anchor (10): Picture tab
- 117 Anchor (10): Anchors tab
- 120 Anchor (10): Conn profile tab
- 123 Anchor (10): Bolts tab
- 124 Anchor (10): Cuts tab
- 128 Wall wall teeth (12)
- 129 Wall wall teeth (12): Picture tab
- 131 Wall wall teeth (12): Parts tab
- 133 Wall wall teeth (12): Cut sec tab
- 134 Wall wall teeth (12): Cut prim tab
- 135 Wall wall teeth (12): Socket tab
- 136 Electric box in wall (84)
- 139 Electric box in wall (84): Picture tab
- 142 Electric box in wall (84): Parts tab
- 143 Electric box in wall (84): Electric box tab
- 147 Electric box in wall (84): Top conn / Bottom conn tab
- 149 Electric box in wall (84): UDA tab
- 152 Sandwich And Double Wall
- 154 Sandwich And Double Wall: Parts tab
- 161 Sandwich And Double Wall: Vertical section tab
- 164 Sandwich And Double Wall: Horizontal section tab
- 170 Sandwich And Double Wall: Insulation tab
- 172 Sandwich And Double Wall: Outside Shell tab
- 175 Sandwich And Double Wall: UDA tab
- 176 Sandwich Wall Horizontal Seam
- 178 Sandwich Wall Horizontal Seam: Picture tab
- 181 Sandwich Wall Horizontal Seam: Rabbets tab
- 181 Sandwich Wall Horizontal Seam: Extra foils tab
- 183 Sandwich Wall Vertical Seam
- 185 Sandwich Wall Vertical Seam: Picture tab
- 187 Sandwich Wall Vertical Seam: Rabbets tab
- 190 Sandwich wall window
- 192 Picture tab
- 194 Bottom detail tab / Left detail tab / Right detail tab
- 198 Top detail tab
- 202 Extra foils tab
- 203 Additional parts tab
- 206 Connections tab
- 207 Door side detail tab / Door bottom detail tab
- 211 Wall layout tools
- 212 Wall layout
- 218 Modify the wall layout
- 222 Wall layout opening
- 225 Wall layout seam
- 228 Wall layout connector
- 229 Wall layout elementation
- 231 Wall layout layer swapper
- 232 Customize the wall layout
- 232 Formwork components
- 233 Beam Formwork
- 234 Beam Formwork: Beam tab
- 236 Beam Formwork: Parameters tab
- 237 Column Formwork
- 239 Column Formwork: Column tab
- 241 Wall Formwork
- 243 Wall Formwork: Panel tab
- 244 Wall Formwork: Parameters tab
- 245 General Beam Form
- 247 Beam Form: Parameters tab
- 248 General Wall Form
- 250 Wall Form: Parameters tab
- 251 General Clamp
- 252 General Clamp: Parameters tab
- 253 General Clip
- 254 General Clip: Parameters tab
- 255 General Tie
- 256 General Tie: Parameters tab
- 257 General Tie and Clips
- 259 General Tie and Clips: Parameters tab
- 259 Openings
- 260 Hole Generation (32)
- 260 Hole Generation (32): Parameters tab
- 262 Polygon Hole Generation (33)
- 262 Polygon Hole Generation (33): Parameters tab
- 263 Flooring
- 264 Automatic seam recognition (30)
- 265 Seam Applicator
- 267 Seam Applicator: Parameters tab
- 267 Modeling of floor bay (66)
- 269 Examples
- 272 Defining slab position
- 273 Defining projection type
- 274 Defining slab profile properties
- 274 Index list
- 275 Adjustment type
- 276 Profile/Seam width
- 276 Sloping slab drainage
- 277 Sloping slab drainage: Parameters tab
- 279 Hollow Core Opening Tool
- 280 Hollow Core Opening Tool: Parameters tab
- 283 Hollow Core Opening Tool: Configuration file tab
- 283 Hollow Core Lifting Loops
- 284 Hollow Core Lifting Loops: Basic settings tab
- 286 Hollow Core Lifting Loops: Lifting device settings tab
- 286 Hollow Core Lifting Loops: Configuration file tab
- 287 Floor Tool
- 288 Floor Tool: Slab properties tab
- 289 Floor Tool: Insulation tab
- 290 Floor Tool: Bay contour tab
- 290 Floor Tool: Slab list tab
- 291 Floor Layout
- 293 Floor Layout: Layer tab
- 295 Floor Layout: General tab
- 296 Floor Layout: Advanced tab
- 298 Floor Layout: Detailing tab
- 300 Floor Layout: User defined tab
- 301 Floor Layout: Modifying a floor
- 315 Floor Layout CIP Filler
- 316 Concrete stairs
- 317 Concrete stairs (65)
- 319 Concrete stairs (65): Stairs tab
- 322 Concrete stairs (65): Step shapes tab
- 324 Concrete stairs (65): Landings tab
- 325 Concrete stairs (65): Ridges tab
- 328 Concrete stairs (65): Stringers tab
- 330 Concrete stairs (65): Anti-skid/Kick plate tab
- 331 Concrete stairs (65): Attributes tab
- 332 Concrete stairs (65): UDA tab
- 332 Stairwells and elevator shafts (90)
- 335 Stairwells and elevator shafts (90): Defining stairwell properties
- 335 Stairwells and elevator shafts (90): Defining number of floors and height
- 335 Stairwells and elevator shafts (90): Defining position
- 336 Stairwells and elevator shafts (90): Defining length and width
- 336 Reinforced concrete stair (95)
- 338 Parameters tab
- 339 Parts tab
- 340 Stairs and landings tab
- 342 Ridges tab
- 344 Stringers tab
- 345 Anti-skid tab
- 346 Bar A tab
- 346 Bar B tab
- 348 Bar C tab
- 349 Bar D tab
- 351 Bar E tab
- 352 Bar F tab
- 353 Bar G tab
- 354 Bar H tab
- 355 Bar I tab
- 356 Bar J tab
- 357 Bar K tab
- 358 Bar L tab
- 359 Mesh picture tab
- 360 Mesh attributes tab
- 361 Mesh bars tab
- 361 Bottom anchor bars tab
- 362 Top anchor bars tab
- 363 Z anchor bars tab
- 364 Landing end bars tab
- 365 UDA tab
- 365 Configuration tab
- 366 Foundations
- 366 Precast foundation block (1028)
- 367 Precast foundation block (1028): Picture tab
- 370 Precast foundation block (1028): Parts tab
- 370 Precast foundation block (1028): Grooves tab
- 371 Concrete foundation (1030)
- 374 Concrete foundation (1030): Picture tab
- 379 Concrete foundation (1030): Parts tab
- 381 Concrete foundation (1030): Massive tab
- 383 Concrete foundation (1030): Piles tab
- 384 Concrete foundation (1030): Inj. tube and rebar tab
- 387 Concrete foundation (1030): Column tab
- 388 Concrete foundation (1030): Stirrups tab
- 391 Reinforcement
- 391 Reinforcement for foundations
- 392 Strip footing (75)
- 393 Strip footing reinforcement properties
- 394 Pile cap reinforcement (76)
- 396 Pad footing and pile cap shapes
- 396 Bar distribution
- 397 Lacer bars for pad footings and pile caps
- 399 Pad footing (77)
- 400 Starter bars
- 402 Starter bar stirrups
- 403 Starter bar location
- 403 Beam, column, and slab reinforcement
- 404 Detailing manager
- 406 Mesh Bars
- 407 Mesh Bars: Picture tab
- 408 Mesh Bars: Detailing tab
- 410 Mesh Bars: Bar end conditions tab
- 411 Mesh Bars: Splicing tab
- 412 Mesh Bars: Attributes tab
- 412 Mesh Bars by Area
- 413 Mesh Bars by Area: Picture tab
- 416 Mesh Bars by Area: Detailing tab
- 418 Mesh Bars by Area: Bar end conditions tab
- 418 Mesh Bars by Area: Splicing tab
- 420 Mesh Bars by Area: Attributes tab
- 420 Rebar coupler
- 422 Rebar coupler: Parameters tab
- 423 Rebar coupler: Attributes tab
- 424 Rebar end anchor
- 425 Rebar end anchor: Parameters tab
- 426 Rebar end anchor: Attributes tab
- 427 Split rebar and add coupler
- 429 Split rebar and add coupler: Parameters tab
- 431 Split rebar and add coupler: Attributes tab
- 432 Rebar end trimming
- 433 Rebar end trimming: Adjusting reinforcing bar ends
- 433 Rebar Coupler and Anchor Tools: Update rebar attributes
- 434 and user-defined attributes (UDAs)
- 436 Slab bars (18)
- 438 Slab reinforcement properties
- 439 Slab Reinforcement Tool
- 439 Slab Reinforcement Tool: Parameters tab
- 441 Slab Reinforcement Tool: Advanced tab
- 442 Beam reinforcement (63)
- 445 Beam reinforcement (63): Beam reinforcement properties
- 445 Beam reinforcement (63): Stirrup spacing tab
- 446 Double tee reinforcement (64)
- 447 Double tee reinforcement properties
- 449 Beam end reinforcement (79)
- 450 Beam end reinforcing bars
- 451 Horizontal U bars 1 and
- 451 Vertical U bars 3A and 3B
- 452 Stirrups 5A and 5B
- 452 Corbel reinforcement (81)
- 454 Corbel reinforcement (81): Main bars tab
- 456 Corbel reinforcement (81): Additional bars tab
- 457 Round column reinforcement (82)
- 460 Main bars tab
- 460 Stirrups tab
- 462 Stirrup attributes tab
- 463 Top tab
- 464 Bottom tab
- 465 Advanced (main bars) tab
- 465 Rectangular column reinforcement (83)
- 468 Rectangular column reinforcement (83): Main bars tab
- 469 Rectangular column reinforcement (83): Bar ends tab
- 470 Rectangular column reinforcement (83): Side bars tab
- 471 Rectangular column reinforcement (83): Stirrups tab
- 473 Rectangular column reinforcement (83): Intermediate links tab
- 475 Rectangular column reinforcement (83): Top / Bottom tab
- 477 Hole reinforcement for slabs and walls (84)
- 480 Hole creation and reinforcement (85)
- 481 Reinforcement around holes
- 482 Stirrups at holes
- 483 Braced girder (88)
- 485 Braced girder (88): Picture tab
- 488 Braced girder (88): Parts tab
- 499 Braced girder (88): Geometry tab
- 501 Braced girder (88): Double wall tab
- 503 Braced girder (89)
- 506 Braced girder (89): Picture tab
- 508 Braced girder (89): Parts tab
- 518 Braced girder (89): Geometry tab
- 520 Braced girder (89): Double wall tab
- 522 Reinforcement mesh array in area (89) / Reinforcement mesh array (91)
- 523 Picture tab
- 526 Overlapping tab
- 526 Attributes tab
- 527 Wall panel reinforcement / Double wall edge and opening reinforcement
- 528 Picture tab
- 529 Reinforcement tab
- 531 Opening tab
- 532 Diagonals tab
- 532 Column tab
- 533 Beam tab
- 534 Additional tab
- 534 Attributes tab
- 534 Multiple Wire Size Mesh
- 535 Multiple Wire Size Mesh: Mesh Parameters tab
- 536 Multiple Wire Size Mesh: Longitudinal/Crossing Wires tab
- 537 Multiple Wire Size Mesh: Attributes tab
- 538 Multiple Wire Size Mesh: Configuration file for reinforcing bar patterns
- 538 Embedded anchors (8)
- 542 Embedded anchors (8): Input tab
- 546 Embedded anchors (8): Placement tab
- 552 Embedded anchors (8): Top placement tab
- 554 Embedded anchors (8): Thickening tab
- 559 Embedded anchors (8): Picture tab
- 562 Embedded anchors (8): Top part tab
- 564 Embedded anchors (8): Bottom part tab
- 565 Embedded anchors (8): Parts tab
- 567 Embedded anchors (8): Reinforcing bar tab
- 569 Embedded anchors (8): Hangup bars tab
- 572 Embedded anchors (8): Horizontal bar tab
- 575 Embedded anchors (8): Special bar tab
- 577 Embedded anchors (8): Advanced tab
- 578 Embedded anchors (8): Bolts
- 579 Embed (1008)
- 580 Embed (1008): Picture tab
- 582 Embed (1008): Top part tab
- 583 Embed (1008): Bottom part tab
- 583 Embed (1008): Parts tab
- 584 Embed (1008): Placement tab
- 586 Embed (1008): Reinforcing bar tab
- 587 Embed (1008): Advanced tab
- 587 Embed (1008): Bolts
- 589 Continuous Beam Reinforcement
- 590 Lifting
- 591 Lifting anchor (80)
- 593 Lifting anchor properties
- 595 Custom components as lifting anchors
- 596 Creating recesses for lifting anchors
- 596 Anchor properties from file
- 598 Automated Reinforcement Layout
- 599 Automated reinforcement layout tools
- 599 Double-tee beam (51)
- 600 Double-tee beam (51): Strand template tab
- 603 Double-tee beam (51): Strand pattern tab
- 604 Double-tee beam (51): Strand profile tab
- 605 Double-tee beam (51): Longitudinal rebar tab
- 606 Double-tee beam (51): Stem mesh tab
- 608 Double-tee beam (51): Multiple sheets tab
- 608 Double-tee beam (51): Stem stirrups tab
- 612 Double-tee beam (51): Flange tab
- 613 Double-tee beam (51): Notch/Opening tab
- 616 Double-tee beam (51): Edge reinforcement tab
- 618 Inverted-tee beam (52)
- 621 Strand template
- 621 Strand pattern
- 622 Strand profile
- 623 Longitudinal rebar
- 625 Stem mesh
- 626 Stem stirrups
- 628 Ledge mesh
- 629 Ledge rebar
- 630 Composite
- 631 End rebar
- 632 Attributes
- 632 Ledge beam (53)
- 635 Strand template
- 636 Strand pattern
- 636 Strand profile
- 637 Longitudinal rebar
- 640 Stem mesh
- 641 Stem stirrups
- 642 Ledge mesh
- 643 Ledge rebar
- 644 Composite
- 645 End rebar
- 646 Attributes
- 647 Rectangular beam (54)
- 649 Strand template
- 650 Strand pattern
- 650 Strand profile
- 651 Longitudinal rebar
- 653 Stem mesh
- 654 Stem stirrups
- 656 Composite
- 657 End rebar
- 658 Attributes
- 658 Ledge spandrel (55)
- 661 Strand template
- 661 Strand pattern
- 662 Strand profile
- 663 Longitudinal rebar
- 665 Stem mesh
- 665 Stem stirrups
- 667 Ledge mesh
- 668 Ledge rebar
- 668 End rebar
- 669 Attributes
- 670 Rectangular spandrel (56)
- 672 Strand template
- 672 Strand pattern
- 673 Strand profile
- 674 Longitudinal rebar
- 676 Stem mesh
- 677 Stem stirrups
- 679 End rebar
- 680 Attributes
- 680 Columns (57)
- 683 Strand reinforcement
- 683 Longitudinal rebar
- 689 Primary ties
- 696 Secondary reinforcement
- 697 Circular column
- 698 Attributes
- 699 Topping (58)
- 700 Topping
- 701 Advanced
- 702 Wash (59)
- 704 Wash
- 705 Advanced
- 705 Hollowcore reinforcement strands (60)
- 706 Strand template
- 708 Strand pattern
- 709 Attributes
- 709 Post-tensioning (61)
- 710 Tendon properties
- 711 Tendon profile
- 712 Edge and Corner Reinforcement (62)
- 713 Edge and Corner Reinforcement (62): Picture tab
- 715 Edge and Corner Reinforcement (62): Edge/Diag bars tab
- 716 Edge and Corner Reinforcement (62): Horizontal/Vertical U bars tab
- 719 U Bar of concrete slab (63)
- 720 U bars
- 721 Wall panel (64)
- 723 Strand template
- 723 Strand pattern
- 725 Longitudinal rebar
- 725 Transverse mesh
- 727 Transverse straight bars
- 728 Transverse stirrups
- 730 Notch opening
- 733 Reinforcement Strand Layout (66)
- 733 Strand template
- 734 Strand pattern
- 735 Strand profile
- 736 Attributes
- 737 CS Components
- 737 3D cut (10)
- 738 Picture
- 738 Definition of the cut
- 738 Offset
- 739 Explode macro
- 739 Opening in wall (40)
- 740 Opening in wall (40): Opening tab
- 740 Type
- 741 Horizontal position
- 743 Vertical
- 744 Horizontal offset, vertical offset
- 744 Rabbet - side
- 745 Cut - rotation
- 745 Shape of the opening
- 746 Opening in wall (40): Insulation tab
- 746 Opening in wall (40): Parameters tab
- 746 Rebar in beam (90)
- 749 Primary bottom bars
- 749 Grade
- 749 Size
- 749 End conditions left
- 750 End conditions right
- 750 Bend lengths left
- 750 Bend lengths right
- 751 Bar not to create
- 751 Creation method
- 752 Positioning and distances
- 753 Shape and pattern
- 755 Primary top bars
- 755 Side left
- 757 Side right
- 757 Stirrups
- 761 Stirrup spacing
- 761 Stirrup reference
- 761 Omit stirrups
- 762 Stirrups
- 763 Stirrup spacing
- 763 Stirrups
- 763 Stirrup spacing
- 764 Advanced
- 764 Configuration
- 765 Bending radius
- 765 Rotation
- 765 Border rebar for single edge (93)
- 767 Pins
- 767 Pin spacing
- 768 Advanced
- 768 Configuration
- 769 Extra rotation
- 769 Bending radius sec
- 769 Detect outside geometry
- 772 Detect negative volume
- 773 Draw axis
- 774 Disclaimer