Concrete Detailing - Tekla User Assistance

See also

Concrete console (111): Picture tab (page 65)

Concrete console (111): Parts tab (page 65)

Concrete console (111): Anchor tab (page 68)

Concrete console (111): Anchor rods (page 69)

Concrete console (111): Socket tab (page 71)

Concrete console (111): Picture tab

Use the Picture tab to define the shape and the dimensions of the console, and the steel support plates and the neoprene layer in Concrete console

(111).

Concrete console (111): Parts tab

Use the Parts tab to define properties for the console, the neoprene layer and the optional steel plates created in Concrete console (111).

Concrete Detailing 65 Beam and column connections

Option

Console width

Console to column

Create console like

Description

Console thickness, and the prefix and a start number for the part position number, material, name, class and comment for the console.

If no value is entered, the width is the same as the width of the beam.

Select how the console is attached to the column.

Default is Part Add.

The No action option means that the console is a loose part and not attached to any other part in the component.

Select the profile type of the console.

Default is Contour plate.

Contour plate = the console is created using the

Contour plate command.

Beam = the console is created using the Beam command.

Neoprene

Neoprene to

Neoprene layer properties.

A neoprene plate for shock absorbing and sounddamping can be created between the beam and the console.

If a trapezium shaped neoprene block is used, the defined thickness will be the thickness on the column side.

Select to which part the neoprene layer is attached, and how the neoprene is attached.

Default is Beam and Weld.

Concrete Detailing 66 Beam and column connections

Option

Holes in neoprene

Diameter of holes in neoprene

Description

Select how the holes in the neoprene part are created.

Default is By bolt.

Diameter of the holes in the neoprene part.

By default, the hole size in the neoprene part is equal to the holes in the console.

Enter a value to overwrite this default hole size.

Select if the neoprene layer is split for each beam separately.

Steel plate horizontal Horizontal steel plate size and properties.

Steel plate vertical

The plate is placed under the neoprene part.

Vertical steel plate size and properties.

The plate is placed at the console side.

Concrete Detailing 67 Beam and column connections