Concrete Detailing - Tekla User Assistance

Depress position

Define depress positions A and B as either a fixed distance or as a percentage of the member length.

Same as A

Define whether depress position B uses the same values as depress position A in the Two points, depressed variable and Two points, depressed fixed strand profiles.

Depression spacing type

To define the depression spacing type, select One point, depressed as the strand profile.

Option Description

Exact location Define the height of the strand in

Strand ht @ position.

Top of depression Define the distance Xd from the depress point in the outmost reinforcing bar to the edge of the stem.

Double-tee beam (51): Longitudinal rebar tab

Use the Longitudinal rebar tab to define longitudinal reinforcement in the

Double-tee beam (51) reinforcement.

Minimum end clear distance C & D

Define the minimum end clearance distance.

Longitudinal rebar definitions

Qty

Grade

Size

Option

Ht

Description

Define the quantity of reinforcing bars.

Define the grade of the reinforcing bar.

Define the size of the reinforcing bar by selecting it from the reinforcing bar catalog.

Define the distance from the end of the reinforcing bar to the face of the strand.

Length type

Define the length type for the reinforcing bar group. Enter additional information in the L, C, or D fields.

Automated Reinforcement Layout 605 Double-tee beam (51)