Concrete Detailing - Tekla User Assistance

3

4

5

1

2

Description

Horizontal bolt distances from the L profile edges.

Default value is half of L profile flange width.

Vertical bolt offsets.

Reference is the L profile centerline. Default value is 0 mm.

Select how the bolts are added in the main part.

Select how the bolts are added in the secondary part.

Bolting direction.

Anchor (10): Cuts tab

Use the Cuts tab to define the cuts and the seams in the main and secondary parts in Anchor (10).

Additionally, the main part can be extended, or the secondary part thickness can be increased or decreased.

You can create a seam by defining a cut between the main part and the secondary part.

Concrete Detailing 124 Panels and walls

Description

1 Extension of the main part.

If you need to extend the part, enter a value. Ensure that you have also selected a cut method from the cut type list. If you select the

No cut option, the part is not extended.

2 Seam width.

Reference is the L profile centerline. Default value is 0 mm.

3 Left side cut along the secondary part.

Reference is the part centerline.

Part thickness is decreased.

4 Right side cut along the secondary part.

Reference is the part centerline.

Part thickness is decreased.

Example

Concrete Detailing 125 Panels and walls

Description

5 Cut reference for the main and secondary parts.

Example

Main part near side

Main part centerline

Main part far side

6 Select the cut type.

Default, no cut

Concrete Detailing 126 Panels and walls

Description Example

Reference is the main part.

Secondary part will be adjusted to the main part using a fitting.

Reference is the main part.

Secondary part will be adjusted to the main part using a line cut.

Reference is main part. Just like previous options, but the longest part of the panel will be removed using a line cut.

No cut

Concrete Detailing 127 Panels and walls